Specifications
General Parameter Value Interfaces USB, LAN, GPIB (optional) Display Intuitive graphic display
Physical Parameter Value Power Supply AC 100 V to 240 V, 50 Hz to 60 Hz, max 30 VA; DC 12 V to 30 V, max 10 W (external power supply) Operating Temperature 0 °C to +50 °C Dimensions (W×H×D) 258 mm × 103 mm × 300 mm (W×H×D, with handle) Weight 2.5 kg (without battery option) Housing Type Benchtop Rack Mount Option Available (e.g., R&S ZZA-3 rack adapter) Cooling Fan-assisted Tripod Mount 1/4-20 UNC thread
General Specifications Parameter Value Product Type RF and Microwave Power Meter Base Unit Model Series R&S NRP
Ordering Information Parameter Value Base Unit Model Number R&S NRP2
Measurement Performance Parameter Value Number of Measurement Channels Up to 4 (simultaneously) System Frequency Range (with sensors) DC to 110 GHz System Dynamic Range (with sensors) 90 dB Measurement Speed High Measurement Modes Average Power, Peak Power, Peak-to-Average Power Accuracy High (regardless of bandwidth and modulation for average power) Modulation Handling Complex signals with digital modulation (e.g., WCDMA, WiMAX, GSM/EDGE, 3G, WLAN, LTE), CW, analog modulation (AM, FM), pulsed RF Compatible Sensor Types R&S NRP-Zx Smart Sensors Power Display Resolution 0.01 dB or 0.001 dB (> -70 dBm); 0.01 pW (ranges < 10 nW) Time Resolution 1 ms Averaging Range 1 to 1000 measurements
Sensor Interface Parameter Value Sensor Calibration Calibration data stored directly in sensor at factory (no calibration required prior to measurement) Sensor Connection Digital interface to base unit or direct PC connection via USB PC Connection for Sensors Via R&S NRP-Z4 passive USB adapter (for direct sensor operation from PC)
Connectivity and System Integration Parameter Value Remote Control Capabilities Full remote control via digital interfaces
Internal Processing and Features Parameter Value S-parameter Correction Yes (for external components)
Display and User Interface Parameter Value User Interface Intuitive
Connectivity Parameter Value USB Host Port 1× USB 2.0 Type A (front panel, for memory sticks) LAN Interface RJ-45, 10/100Base-T Ethernet GPIB Interface IEEE 488.2
Software & Control Parameter Value Remote Control Language SCPI (Standard Commands for Programmable Instruments) Drivers IVI-COM, IVI.NET, LabView PC Software R&S NRPV Power Viewer
Environmental Parameter Value Storage Temperature -40 °C to +70 °C Humidity 5% to 95% relative humidity, non-condensing Altitude Up to 3000 m Vibration (Operating) MIL-PRF-28800F Class 3, Curve A Shock (Operating) MIL-PRF-28800F Class 3, Curve B
Compliance Parameter Value CE Mark Yes EMC Compliance EN 61326-1 Safety Compliance EN 61010-1 FCC Compliance Part 15 Subpart B ICES Compliance ICES-003
Power Parameter Value Optional Internal Battery Li-Ion (NRP-B2) or NiMH (NRP-B1) Battery Operating Time >4.5 hours (with NRP-B2) Battery Charging Time Approx. 5 hours (unit off), approx. 8 hours (unit on) with NRP-B2 AC Input Voltage 100 V to 240 V AC AC Input Frequency 50 Hz to 60 Hz Power Consumption Max. approx. 25 W (including battery charging)
Measurement Control Parameter Value Trigger Sources Internal, External, Manual Trigger Modes Free Run, Single, Continuous, External
Interfaces Parameter Value USB Device Port Type USB 2.0 Type B USB Host Port Type USB 2.0 Type A LAN Connector RJ-45 LAN Speed 10/100Base-T External Trigger I/O BNC (front panel) External Reference Frequency Input 10 MHz (BNC, front panel) External Reference Frequency Output 10 MHz (BNC, front panel)
Storage Parameter Value Internal Storage 1 GB internal flash memory (for settings, results, screenshots, firmware)
Technology
RF and Microwave Power Measurement, Smart Sensor Technology, Multipath Sensor Technology
Applications
Research and Development, Production Test, Mobile Service, Broadband Modulation Signal Analysis (WCDMA, WiMAX, GSM/EDGE, 3G, WLAN, LTE), CW Measurement, Analog Modulation (AM, FM), Pulsed RF Measurement
Looking for the Rohde & Schwarz NRP/NRP2? Tell us what you need. We're building a network of equipment dealers and will get back to you if we can help source it — no obligation.
Tell us what you need Selling this kind of equipment? Sell with us
