DPO7054

The Tektronix DPO7054 is a 4-channel, 500 MHz Digital Phosphor Oscilloscope from the DPO7000 series. Featuring real-time sampling rates up to 10 GS/s, a FastAcq waveform capture rate exceeding 250,000 wfms/s, and standard Pinpoint™ triggering, the DPO7054 is optimized for signal integrity analysis, digital design verification, and troubleshooting.

Embedded Systems Signal Analysis Signal Integrity

Specifications

General

Parameter	Value
Display	12.1-inch color TFT-LCD touchscreen, 1024 × 768 XGA resolution

Vertical System

Parameter	Value
Input Channels	4
Analog Bandwidth (-3 dB)	500 MHz
Calculated Rise Time (10% to 90%)	700 ps
Calculated Rise Time (20% to 80%)	500 ps
Hardware Bandwidth Limits	250 MHz or 20 MHz
Vertical Resolution	8 bits (>11 bits in Hi-Res mode)
Input Coupling	DC, AC, GND
Input Sensitivity Range (1 MΩ)	1 mV/div to 10 V/div
Input Sensitivity Range (50 Ω)	1 mV/div to 1 V/div
Maximum Input Voltage (50 Ω)	5 V rms with peaks ≤ ±24 V
DC Gain Accuracy	±1%

Horizontal System

Parameter	Value
Maximum Real-Time Sample Rate (1 Channel)	10 GS/s
Maximum Real-Time Sample Rate (2 Channels)	5 GS/s
Maximum Real-Time Sample Rate (4 Channels)	2.5 GS/s
Maximum Record Length (Standard)	10M points per channel (4-ch)
Maximum Record Length (Optional Upgrade)	Up to 400M points (1-ch) / 100M points (4-ch) with Option 10RL
Time Base Accuracy	±2.5 ppm
Channel-to-Channel Deskew Range	±75 ns

Acquisition System

Parameter	Value
Acquisition Modes	Sample, Peak Detect, Averaging, Envelope, Hi-Res, FastAcq, FastFrame
Maximum Waveform Capture Rate (FastAcq)	>250,000 wfms/s

Trigger System

Parameter	Value
Trigger Modes	Auto, Normal, Single
Trigger System	Pinpoint™ Trigger System
Trigger Types	Edge, Glitch, Width, Runt, Window, Timeout, Transition, Setup/Hold, Logic Pattern, Logic State, Video, Serial Pattern
Trigger Coupling	DC, AC, HF Reject, LF Reject, Noise Reject

Display & User Interface

Parameter	Value
Display Size	12.1 in (307.3 mm)
Display Resolution	1024 × 768 (XGA)
Touchscreen Interface	Standard integrated touchscreen

Connectivity & I/O Interfaces

Parameter	Value
Probe Interface System	TekVPI Probe Interface

Power Supply

Parameter	Value
Mains Frequency	47 to 63 Hz (100 to 240 V), 360 to 440 Hz (115 V)
Maximum Power Consumption	550 W

Environmental & Safety

Parameter	Value
Non-Operating Temperature	-40 °C to +71 °C
Operating Altitude	3,000 m (9,843 ft)

Environmental

Parameter	Value
Non-Operating Altitude	12,192 m (40,000 ft)

Connectivity

Parameter	Value
LAN Port	1× RJ-45, 10/100/1000Base-T
GPIB Interface	IEEE-488.2 standard connector

Performance

Parameter	Value
Automated Measurements	53 built-in measurements

Compliance

Parameter	Value
Safety Certifications	UL61010-1, CSA22.2 No. 61010-1, EN61010-1, IEC61010-1
LXI Compliance	LXI Class C

Accessories

Parameter	Value
Standard Included Probes	4× P6139A 500 MHz 10x Passive Probes

Inputs & Outputs

Parameter	Value
Probe Interface Compatibility	TekVPI Probe Interface (supports auto-scaling, units, and power for active/current probes)

Waveform Analysis

Parameter	Value
Math Waveforms	4 math waveforms (Math 1 to Math 4)
FFT Window Functions	Rectangular, Hamming, Hanning, Kaiser-Bessel, Blackman-Harris, Gaussian, Flattop2, Tek Exponential

Automated Measurements

Parameter	Value
Measurement Statistics	Mean, Minimum, Maximum, Standard Deviation, Population

Software & Control

Parameter	Value
Remote Web Interface	e*Scope web-based remote control via standard web browser

Technology

Digital Phosphor Oscilloscope (DPO)

Applications

Signal Integrity Verification, Debugging, Compliance Testing, Embedded Systems