SpecAtlasHub

DPO70604

TektronixDigital

The Tektronix DPO70604 is a high-performance 6 GHz digital phosphor oscilloscope from the DPO70000 series, designed to address challenging signal integrity and debugging issues on high-speed serial designs. Operating on a Microsoft Windows XP-based platform, it delivers outstanding real-time acquisition rates up to 50 GS/s, Pinpoint triggering capabilities, and an expansive 12.1-inch touch screen interface.

Jitter AnalysisSerial Data AnalysisSignal AnalysisSignal Integrity

Specifications

General

ParameterValue
InterfacesUSB 2.0 Host and Device, Gigabit Ethernet (RJ-45), GPIB (IEEE-488.2), LXI Class C, DVI, VGA
Display12.1-inch XGA Touch Screen (1024 × 768 pixels)
Optical DriveCD-R/W and DVD-ROM drive

Physical

ParameterValue
Power Supply100 to 240 V AC ±10%, 50/60 Hz; 115 V AC ±10%, 400 Hz
Operating Temperature5 °C to +45 °C
Dimensions (W×H×D)451 mm × 298 mm × 489 mm
Weight19.6 kg
Cooling Clearance76 mm (3 in) on left, right, and rear

Vertical System

ParameterValue
Analog Bandwidth (-3 dB)6 GHz
Calculated Rise Time (10% to 90%)62 ps (with DSP)
Calculated Rise Time (20% to 80%)45 ps
Number of Input Channels4
Input Impedance50 Ω ±1.5%
Input CouplingDC, GND
Input Sensitivity Range10 mV/div to 1 V/div
Vertical Resolution (ADC)8-bit (up to 11-bit with averaging)
DC Gain Accuracy±2%
Maximum Input Voltage1.5 V RMS (<100 mV/div), 5.5 V RMS (≥100 mV/div)
Position Range±5 divisions
Input Connector TypeTekConnect
Channel-to-Channel Isolation≥120:1 at ≤100 MHz, ≥80:1 at >100 MHz to 2.5 GHz, ≥50:1 at >2.5 GHz to 5 GHz, ≥40:1 at >5 GHz to 6 GHz
Hardware Bandwidth Limits250 MHz

Horizontal System

ParameterValue
Maximum Real-Time Sampling Rate25 GS/s (4 channels simultaneously), 50 GS/s (2 channels)
Maximum Record Length10 MS (standard), up to 200 MS (option dependent)
Time Base Range20 ps/div to 1000 s/div
Channel-to-Channel Deskew Range±75 ns
Time Base Accuracy±1.5 ppm
Horizontal Delay Time Range-5 ns to 250 s

Trigger System

ParameterValue
Trigger SourcesChannel 1, Channel 2, Channel 3, Channel 4, Auxiliary In, Line
Trigger ModesAuto, Normal, Single
Trigger CouplingDC, AC, HF Rej, LF Rej, Noise Rej
Trigger Holdoff Range250 ns to 12 s
Edge TriggeringYes
Pulse Width TriggeringYes
Runt TriggeringYes
Timeout TriggeringYes
Pattern TriggeringYes
State TriggeringYes
Setup/Hold TriggeringYes
Window TriggeringYes
Serial Pattern TriggeringUp to 3.125 Gb/s
Transition TriggeringTrigger on pulse edge transition rate (slew rate) faster or slower than specified rate
Enhanced Trigger Jitter<100 fs RMS (typical)

Acquisition System

ParameterValue
Maximum Waveform Capture Rate>300,000 wfms/s

Waveform Measurements and Analysis

ParameterValue
Automatic Measurements53 parameters
Waveform MathBasic (Add, Subtract, Multiply, Divide) and Advanced (Formula Editor)
Fast Fourier Transform (FFT)Yes

Display and User Interface

ParameterValue
Display TypeLiquid Crystal Active Matrix TFT Color
Color GradingYes

Connectivity and Ports

ParameterValue
LAN Port (Ethernet)10/100/1000 Base-T RJ-45
Reference Clock Input10 MHz
Reference Clock Output10 MHz

Processor and Storage

ParameterValue
Internal Operating SystemMicrosoft Windows XP Professional

Environmental Specifications

ParameterValue
Storage Temperature Range-40 °C to +71 °C
Operating Humidity Range8% to 80% RH (non-condensing)
Operating Altitude3,000 m (9,843 ft)

Physical Characteristics

ParameterValue
Form FactorBenchtop

Interfaces

ParameterValue
LXI ComplianceLXI Class C v1.3

Inputs & Outputs

ParameterValue
Auxiliary Trigger Input Impedance50 Ω
Auxiliary Trigger Max Input Voltage5 V RMS
GPIB PortIEEE-488.2

Technology

Digital Phosphor Oscilloscope (DPO)

Applications

High-Speed Serial Design, Signal Integrity Analysis, Debugging, and Compliance Testing

Looking for the Tektronix DPO70604?

Tell us what you need. We're building a network of equipment dealers and will get back to you if we can help source it — no obligation.

Selling this kind of equipment? Sell with us