The Tektronix DPO73304DX is a high-performance 33 GHz Digital Phosphor Oscilloscope designed for real-time spectral analysis, high-speed serial data compliance, and advanced research applications. It delivers a real-time sample rate of 100 GS/s on 2 channels (or 50 GS/s on 4 channels) combined with exceptional signal fidelity, low noise, and advanced trigger capabilities.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | USB 2.0, LAN (10/100/1000 Base-T, LXI Class C), GPIB, DVI-I, DisplayPort |
| Display | 12.1-inch color TFT-LCD, XGA (1024 × 768) touchscreen |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100 to 240 V AC ±10% (50/60 Hz), 115 V AC ±10% (400 Hz), <980 VA maximum |
| Operating Temperature | 5 °C to +45 °C |
| Dimensions (W×H×D) | 457 mm × 298 mm × 513 mm |
| Weight | 24 kg |
| Cooling Clearance | 76 mm (3 in.) on bottom, left side, right side, and rear |
Vertical System
| Parameter | Value |
|---|---|
| Analog Bandwidth (2 Channels) | 33 GHz |
| Analog Bandwidth (4 Channels) | 23 GHz |
| Analog Input Channels | 4 |
| Calculated Rise Time (10% to 90%, 2 Channels) | 13 ps |
| Calculated Rise Time (10% to 90%, 4 Channels) | 18 ps |
| Calculated Rise Time (20% to 80%, 2 Channels) | 9 ps |
| Calculated Rise Time (20% to 80%, 4 Channels) | 13 ps |
| Input Impedance | 50 Ω |
| Input Coupling | DC |
| Vertical Resolution | 8 bit (up to 11 bit with Hi-Res) |
| DC Gain Accuracy | ±2% of full scale |
| Channel-to-Channel Isolation | ≥120:1 at ≤10 GHz |
| Input Connector Type | 2.92 mm (K) female |
| Vertical Sensitivity Range | 6.25 mV/div to 600 mV/div |
| Vertical Position Range | ±5 divisions |
| Vertical Resolution (Hi-Res Mode) | Up to 11 bits |
Horizontal System
| Parameter | Value |
|---|---|
| Timebase Range | 2 ps/div to 1000 s/div |
| Timebase Accuracy | ±1.5 ppm |
| Timebase Delay Time Range | -5.0 ks to 1.0 ks |
| Channel-to-Channel Deskew Range | ±75 ns |
| Maximum Record Length (Option 100XL, 2 Channels) | 2 Gpoints |
| Maximum Record Length (Option 100XL, 4 Channels) | 1 Gpoints |
| External Reference Clock Input Frequency | 10 MHz / 100 MHz (selectable) |
| Internal Reference Clock Frequency | 10 MHz |
Acquisition System
| Parameter | Value |
|---|---|
| Maximum Real-Time Sample Rate (2 Channels) | 100 GS/s |
| Maximum Real-Time Sample Rate (4 Channels) | 50 GS/s |
| Standard Record Length (2 Channels) | 62.5 MS |
| Standard Record Length (4 Channels) | 31.25 MS |
| Maximum Record Length (Option 20XL, 2 Channels) | 500 MS |
| Maximum Record Length (Option 20XL, 4 Channels) | 250 MS |
| Maximum Waveform Capture Rate | >300,000 wfm/s |
| Acquisition Modes | Sample, Peak Detect, Averaging, Envelope, Hi-Res, FastAcq, FastFrame |
| Maximum Record Length (Option 5XL) | 62.5 MS |
| Maximum Record Length (Option 10XL) | 250 MS (4 channels) |
Trigger System
| Parameter | Value |
|---|---|
| Trigger Sources | Ch 1, Ch 2, Ch 3, Ch 4, Aux In |
| Trigger Modes | Auto, Normal, Single |
| Trigger Coupling | DC, AC, Low Frequency Reject, High Frequency Reject, Noise Reject |
| Trigger Holdoff Range | 250 ns to 12 s |
| Standard Trigger Types | Edge, Glitch, Width, Runt, Window, Timeout, Transition, Pattern, State, Setup/Hold, Sequence |
| External Trigger Input Impedance | 50 Ω |
| Trigger Jitter (Typical) | < 100 fs RMS (with Enhanced Triggering ON) |
| Auxiliary Trigger Input Connector | BNC (front panel) |
Waveform Measurements and Analysis
| Parameter | Value |
|---|---|
| Automatic Measurements | 53 built-in measurements |
| Waveform Math Operators | Arithmetic, algebraic, filtering, FFT, integration, differentiation, logical, relational, user-defined equations |
| FFT Window Types | Rectangular, Hamming, Hanning, Kaiser-Bessel, Blackman-Harris, Gaussian, Flattop2, TekExponential |
Display and User Interface
| Parameter | Value |
|---|---|
| Waveform Display Formats | YT, XY, XYZ |
Connectivity and Interfaces
| Parameter | Value |
|---|---|
| Reference Clock Input | BNC connector, 10 MHz |
| Reference Clock Output | BNC connector, 10 MHz |
| Auxiliary Output | BNC connector, trigger output or recovery clock output |
Environmental and Compliance
| Parameter | Value |
|---|---|
| Storage Temperature | -22 °C to +60 °C |
| Operating Humidity | 8% to 80% RH at up to +32 °C; 5% to 45% RH above +32 °C up to +45 °C |
| Operating Altitude | Up to 3,000 m (9,843 ft.) |
| Storage Altitude | Up to 12,000 m (39,370 ft.) |
| Safety Certifications | UL 61010-1, CSA 61010-1, EN 61010-1, IEC 61010-1 |
| EMC Certifications | EN 61326-1, EN 61326-2-1, 2004/108/EC |
Computer System
| Parameter | Value |
|---|---|
| Processor | Intel Core i7 Quad-Core |
| Operating System | Windows 10 IoT Enterprise 64-bit |
| System Memory | 16 GB |
| Standard Storage | 512 GB removable Solid State Drive (SSD) |
Interfaces
| Parameter | Value |
|---|---|
| GPIB Interface | IEEE-488.2 |
| LAN Interface | RJ-45, 10/100/1000 Mbps Gigabit Ethernet |
| USB Device Ports | 1x USB 2.0 (rear panel) |
| LXI Compliance | LXI Class C |
Technology
Digital Phosphor Oscilloscope (DPO)
Applications
High-speed serial bus design, optical communications, spectral analysis, RF/microwave design, and advanced physics research
Looking for the Tektronix DPO73304DX?
Tell us what you need. We're building a network of equipment dealers and will get back to you if we can help source it — no obligation.
Selling this kind of equipment? Sell with us