The Tektronix DPO7354 is a high-performance Digital Phosphor Oscilloscope (DPO) belonging to the DPO7000 Series. Designed for rigorous signal integrity applications, it provides 3.5 GHz of analog bandwidth, highly flexible Pinpoint triggering, and advanced analysis software running on a Windows XP platform. It offers an exceptionally fast waveform capture rate and a large, high-resolution touch screen for intuitive operation.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | USB 2.0, LAN (10/100/1000), GPIB, RS-232, XGA Video Output |
| Display | 12.1-inch XGA (1024 x 768) Touch Screen |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100 to 240 V ±10% (47 to 66 Hz), 115 V ±10% (360 to 440 Hz); 550 W maximum |
| Dimensions (W×H×D) | 451 x 292 x 265 |
| Weight | 15 |
Vertical System
| Parameter | Value |
|---|---|
| Number of Analog Channels | 4 |
| Analog Bandwidth | 3.5 GHz |
| Input Impedance | 50 Ω ± 1%, 1 MΩ ± 1% |
| Vertical Resolution | 8 bits (>11 bits with HiRes) |
| Input Coupling | AC, DC, GND |
| Vertical Sensitivity (50 Ω) | 1 mV/div to 1 V/div |
| Vertical Sensitivity (1 MΩ) | 1 mV/div to 10 V/div |
| DC Gain Accuracy | ±1.5% (with offset set to 0 V) |
| Rise Time (10% to 90%, 50 Ω) | 115 ps (typical) |
| Rise Time (20% to 80%, 50 Ω) | 80 ps (typical) |
| Hardware Bandwidth Limits | 250 MHz or 20 MHz |
| Maximum Input Voltage (50 Ω) | 5 VRMS, with peaks ≤ ±24 V |
| Maximum Input Voltage (1 MΩ) | ±150 V CAT I, derate at 20 dB/decade to 9 VRMS above 200 kHz |
| Channel-to-Channel Isolation | ≥100:1 at ≤100 MHz, ≥30:1 at >100 MHz up to rated bandwidth |
Horizontal System
| Parameter | Value |
|---|---|
| Maximum Sample Rate (1 Channel) | 40 GS/s |
| Maximum Sample Rate (4 Channels) | 10 GS/s |
| Maximum Record Length | Up to 400 Megasamples (option dependent) |
| Timebase Accuracy | ±2.5 ppm |
| Deskew Range | ±75 ns |
Acquisition System
| Parameter | Value |
|---|---|
| Maximum Waveform Capture Rate | >250,000 wfms/s |
| Acquisition Modes | Sample, Peak Detect, Averaging, Envelope, Hi-Res, FastAcq, Roll |
Triggering System
| Parameter | Value |
|---|---|
| Advanced Trigger Types | Pinpoint™ Triggering (over 1400 combinations) |
| Low-Speed Serial Protocol Triggering | I2C, SPI, RS-232, CAN |
Display System
| Parameter | Value |
|---|---|
| Display Type | Color LCD Touch Screen |
| Display Size | 12.1 inches |
| Display Resolution | 1024 x 768 pixels (XGA) |
Computer System and Storage
| Parameter | Value |
|---|---|
| Operating System | Microsoft Windows XP |
| Standard Software | OpenChoice® Software, MyScope® |
Waveform Measurements and Analysis
| Parameter | Value |
|---|---|
| Optional Analysis Software | Ethernet, USB 2.0 Compliance, Jitter, Timing, Eye Diagram, Power, DDR Memory, CAN, LIN |
Environmental
| Parameter | Value |
|---|---|
| Non-Operating Temperature | -40 °C to +71 °C |
| Operating Altitude | Up to 3,000 m (9,843 ft) |
| Non-Operating Altitude | Up to 12,192 m (40,000 ft) |
| Operating Humidity | 5% to 95% RH (≤ +30 °C), 5% to 45% RH (> +30 °C to +50 °C) |
| Non-Operating Humidity | 5% to 95% RH (≤ +30 °C), 5% to 45% RH (> +30 °C to +60 °C) |
Trigger System
| Parameter | Value |
|---|---|
| Trigger Jitter (RMS) | 1.5 ps RMS (typical) |
| Trigger Coupling | DC, AC, HF Rej, LF Rej, Noise Rej |
| Holdoff Range | 250 ns to 12 s |
Power
| Parameter | Value |
|---|---|
| Power Consumption | 550 W maximum |
Compliance
| Parameter | Value |
|---|---|
| Safety Approvals | UL 61010-1, CSA C22.2 No. 61010-1, EN 61010-1 |
Technology
Digital Phosphor
Applications
Serial and digital design, signal integrity verification, characterization, debugging, compliance testing, and network design.