The Tektronix DPO7354C is a 3.5 GHz, 4-channel Digital Phosphor Oscilloscope from the DPO7000C series. It delivers up to 40 GS/s real-time sampling on one channel and 10 GS/s across all channels, combined with standard 50M record length (up to 500M optional). Featuring a 12.1-inch touchscreen, Pinpoint® triggering, and a Windows 7 64-bit operating system, the DPO7354C is designed for high-performance signal analysis, jitter characterization, compliance testing, and advanced debugging of complex digital designs.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | USB Host (front/side), USB Device, 10/100/1000BASE-T Ethernet (RJ-45), Video Out (DVI-D/VGA), TekConnect Probe Interface |
| Display | 12.1 in. (307 mm) Bright XGA Display with Touch Screen |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100 V to 240 V ±10% (50 Hz to 60 Hz); 115 V ±10% (400 Hz); <550 W maximum power consumption |
| Operating Temperature | 5 °C to 45 °C |
| Dimensions (W×H×D) | 451 mm × 292 mm × 265 mm |
| Weight | 15 kg |
Vertical System
| Parameter | Value |
|---|---|
| Analog Bandwidth (-3 dB) | 3.5 GHz |
| Calculated Rise Time (10% to 90%) | 115 ps |
| Number of Input Channels | 4 |
| Input Impedance (1 MΩ) | 1 MΩ ±1% with 13 pF ±2 pF |
| Input Impedance (50 Ω) | 50 Ω ±1% |
| Vertical Resolution (ADC) | 8 bit (>11 bit with high res) |
| Maximum Input Voltage (1 MΩ) | ±150 V CAT I, derate at 20 dB/decade to 9 Vrms above 200 kHz |
| Maximum Input Voltage (50 Ω) | 5 VRMS, with peaks ≤ ±24 V |
| Input Coupling | AC, DC, GND |
| Vertical Sensitivity (50 Ω) | 1 mV/div to 1 V/div |
| Vertical Sensitivity (1 MΩ) | 1 mV/div to 10 V/div |
| DC Gain Accuracy | ±1% (for ≥5 mV/div), ±1.5% (for <5 mV/div) |
| Vertical Position Range | ±5 divisions |
| Hardware Bandwidth Limits | 20 MHz, 250 MHz |
| Channel-to-Channel Isolation | ≥100:1 at ≤100 MHz, ≥30:1 at >100 MHz up to 3.5 GHz |
| Low-Frequency Limit (AC Coupled, typical) | <10 Hz at 1 MΩ, <150 kHz at 50 Ω |
| Probe Interface | TekConnect |
| Offset Range (50 Ω) | 1 mV/div to 12 mV/div: ±1 V; 12.2 mV/div to 98 mV/div: ±1.5 V; 99 mV/div to 1 V/div: ±10 V |
| Offset Range (1 MΩ) | 1 mV/div to 12 mV/div: ±1 V; 12.2 mV/div to 98 mV/div: ±1.5 V; 99 mV/div to 1 V/div: ±10 V; 1.01 V/div to 10 V/div: ±100 V |
| Effective Number of Bits (ENOB) | 5.4 bits (typical at 3 GHz, 50 Ω, 100 mV/div, 10 GS/s) |
Horizontal System
| Parameter | Value |
|---|---|
| Maximum Real-Time Sampling Rate (1 Channel) | 40 GS/s |
| Maximum Real-Time Sampling Rate (All Channels) | 10 GS/s |
| Maximum Record Length (Standard) | 50 M points (1 channel) |
| Maximum Record Length (Optional) | Up to 500 M points |
| Time Base Range | 25 ps/div to 1000 s/div |
| Channel-to-Channel Deskew Range | ±75 ns |
| Max Duration at Highest Sample Rate (Standard) | 1.25 ms |
| Max Duration at Highest Sample Rate (Optional) | Up to 12.5 ms |
| Maximum Real-Time Sampling Rate (2 Channels) | 20 GS/s |
| Timebase Stability | ±1.5 ppm initial accuracy; aging ±1.0 ppm/year |
| Reference Loop Input Frequency | 9.8 MHz to 10.2 MHz |
Acquisition System
| Parameter | Value |
|---|---|
| Sample Acquisition Mode | Acquire sampled values |
| Peak Detect Mode Min Pulse Width | 50 ps |
| Averaging Factor Range | From 2 to 10,000 waveforms |
| Envelope Mode | From 1 to 2×10^9 waveforms included in min-max envelope |
| High Resolution Mode (HiRes) | Real-time boxcar averaging reduces random noise and increases resolution |
| Roll Mode | Scrolls sequential waveform points across display at sweep speeds slower than 50 ms/div (up to 10 MS/s with 40M max record length) |
| FastAcq Acquisition Mode | Optimizes the instrument for analysis of dynamic signals and capture of infrequent events |
| Maximum FastAcq Waveform Capture Rate | >250,000 wfms/s on all 4 channels simultaneously |
| Waveform Database Mode | Accumulate waveform database providing three-dimensional array of amplitude, time, and counts |
| FastFrame Segmented Memory | Acquisition memory divided into segments; maximum trigger rate >310,000 waveforms per second |
Trigger System
| Parameter | Value |
|---|---|
| Trigger Modes | Auto, Normal, and Single |
| Trigger Coupling | DC, AC, HF Rej, LF Rej, Noise Reject |
| Trigger Holdoff Range | 250 ns to 12 s |
| Trigger Level Range (Internal) | ±12 divisions from center of screen |
| Trigger Level (Aux In, 50 Ω) | ±5 V |
| Trigger Level (Aux In, 1 MΩ) | ±15 V |
| Trigger Level (Line) | Fixed at 0 V |
| Enhanced Triggering | Corrects the difference in timing between the trigger path and the acquired data path |
| Trigger Sequences | Main, Delayed by Time, Delayed by Events, Reset by Time, Reset by State, Reset by Transition |
| Trigger Delay by Time | 3.2 ns to 250 s |
| Trigger Delay by Events | 1 to 10,000,000 events |
| Serial Pattern Trigger (Option ST1G) | Up to 64-bit serial word recognizer, NRZ-encoded data up to 1.25 Gb/s |
| Communications-related Triggers (Option MTM) | Support for AMI, HDB3, BnZS, CMI, MLT3, and NRZ encoded communications signals |
| Video Trigger Formats and Field Rates | NTSC, PAL, SECAM, and HDTV 1080/24sF, 1080p/25, 1080i/50, 1080i/60, 1080p/24, 720p/60, 480p/60 |
| Standard Trigger Types | Edge, Glitch, Width, Runt, Timeout, Transition Time, Logic Pattern, Logic State, Setup/Hold, Window |
| Trigger Jitter (typical) | <1.5 ps RMS (with Enhanced Triggering enabled) |
| Trigger Sensitivity (A Trigger, Edge, DC Coupled) | 0.7 div from DC to 50 MHz, increasing to 1.2 div at 3 GHz |
Clock Recovery System
| Parameter | Value |
|---|---|
| Clock Recovery PLL Bandwidth | Fixed at FBaud/500 |
| Clock Recovery Frequency Range | 1.5 MBaud to 1.25 GBaud |
| Clock Recovery Tracking/Acquisition Range | ±5% of requested baud rate (typical) |
| Min Signal Amplitude for Clock Recovery | 1 div p-p up to 1.25 GBaud (typical) |
Waveform Measurements and Analysis
| Parameter | Value |
|---|---|
| Automated Measurements | 53 automated measurements |
| Advanced Search and Mark | Automatically search and mark events and document waveforms |
| Waveform Histograms | Yes |
| FFT Analysis | Yes |
Display and User Interface
| Parameter | Value |
|---|---|
| MyScope Custom Control Windows | Yes |
Connectivity and Ports
| Parameter | Value |
|---|---|
| LXI Compliance | LXI Class C Compliant |
Processor and Storage
| Parameter | Value |
|---|---|
| Operating System | Microsoft Windows 7 64-bit |
Physical Characteristics
| Parameter | Value |
|---|---|
| Form Factor | Benchtop |
| Cooling Clearance (Left Side) | 76 mm (3 in.) |
Computer System
| Parameter | Value |
|---|---|
| Processor | Intel Core 2 Duo, 3.0 GHz |
| System Memory | 8 GB |
| Hard Disk Drive | ≥500 GB removable HDD (standard) |
Environmental
| Parameter | Value |
|---|---|
| Operating Altitude | 3,000 m (10,000 ft.) |
| Storage Altitude | 12,192 m (40,000 ft.) |
Ports & Connectivity
| Parameter | Value |
|---|---|
| External Reference Output | 10 MHz, >1.2 V p-p into 50 Ω |
| Video Output Ports | 1x DVI-D, 1x VGA |
General Specifications
| Parameter | Value |
|---|---|
| Optical Drive | Built-in DVD±RW |
| Safety Compliance | UL61010-1, CAN/CSA-C22.2 No. 61010-1, EN 61010-1 |
| Electromagnetic Compatibility | EN 61326-1, EN 61326-2-1, FCC Part 15 Subpart B Class A |
Environmental & Physical
| Parameter | Value |
|---|---|
| Vibration Resistance (Operating) | 0.31 g RMS, 5 to 500 Hz |
| Vibration Resistance (Non-operating) | 2.46 g RMS, 5 to 500 Hz |
Technology
Digital Phosphor Oscilloscope (DPO)
Applications
Signal Integrity, Debugging Complex Designs, Serial Bus Analysis, Compliance Testing