The Tektronix DSA73304D is a high-performance Digital Serial Analyzer offering 33 GHz of analog bandwidth, 100 GS/s real-time sample rate on two channels, and up to 100 Mpoints of record length per channel standard. It is designed for ultra-high-speed serial data compliance testing, advanced jitter analysis, and complex signal verification.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | USB 2.0 host ports, USB device port, LAN (10/100/1000 Base-T LXI Class C), GPIB, Auxiliary Trigger Input, Trigger Output, Reference Clock Input, Reference Clock Output, DVI-I, DisplayPort, Audio In/Out |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100 to 240 V AC ±10% (50 to 60 Hz), 115 V AC ±10% (400 Hz), < 1200 VA maximum power consumption |
| Operating Temperature | 5 °C to 45 °C |
| Dimensions (W×H×D) | 451 mm × 298 mm × 489 mm |
| Weight | 24.0 kg |
| Form Factor | Benchtop (rackmount kit available) |
Vertical System
| Parameter | Value |
|---|---|
| Analog Bandwidth (-3 dB) | 33 GHz |
| Calculated Rise Time (10% to 90%) | 14 ps (typical) |
| Calculated Rise Time (20% to 80%) | 9.5 ps (typical) |
| Number of Input Channels | 4 analog |
| Input Coupling | 50 Ω, DC |
| Input Impedance | 50 Ω ± 3% |
| Input Sensitivity Range | 6.25 mV/div to 600 mV/div |
| Vertical Resolution | 8 bits (>11 bits with Hi-Res) |
| DC Gain Accuracy | ±2% |
| Offset Range | ±3.4 V at 100 mV/div to 600 mV/div; ±1.2 V at 6.25 mV/div to 99.5 mV/div |
| Input Connector Type | 2.92 mm female |
| Maximum Input Voltage | <1.2 V RMS (<100 mV/div), <5.0 V RMS (>=100 mV/div) |
| Termination Voltage Range | ±3.4 V |
| Channel-to-Channel Isolation | >= 120:1 (<= 10 GHz), >= 80:1 (10 to 20 GHz), >= 50:1 (20 to 33 GHz) |
| Effective Number of Bits (ENOB) | 5.5 bits (typical at 10 GHz) |
Acquisition System
| Parameter | Value |
|---|---|
| Maximum Real-Time Sample Rate | 100 GS/s (on 2 channels), 50 GS/s (on 4 channels) |
| Standard Record Length (Memory Depth) | 100 Mpoints per channel |
| Waveform Capture Rate | >300,000 wfm/s (FastAcq mode) |
| Acquisition Modes | Sample, Average, Envelope, High Resolution, Waveform Database, FastAcq, FastFrame |
Horizontal System
| Parameter | Value |
|---|---|
| Timebase Range | 2.0 ps/div to 1000 s/div |
| Timebase Accuracy | ±1.5 ppm (initial accuracy) |
| Timebase Delay Time Range | -5.0 s to 250 s |
| Channel-to-Channel Deskew Range | ±75 ns |
| Jitter Noise Floor | 120 fs RMS (typical) |
Trigger System
| Parameter | Value |
|---|---|
| Trigger Sources | Ch 1, Ch 2, Ch 3, Ch 4, Auxiliary Input, Line |
| Trigger Modes | Auto, Normal, Single |
| Trigger Coupling | DC, AC, HF Rej, LF Rej, Noise Rej |
| Trigger Holdoff Range | 250 ns to 12 s |
| Standard Trigger Types | Edge, Glitch, Width, Runt, Window, Timeout, Transition, Pattern, State, Setup/Hold, Sequence (A->B) |
| Advanced/Protocol Trigger Types | Standard hardware-based serial pattern trigger up to 6.25 Gb/s |
| Trigger Jitter | 100 fs RMS (typical, with Enhanced Triggering ON) |
Waveform Measurements and Analysis
| Parameter | Value |
|---|---|
| Automatic Measurements | 53 automatic measurements |
| Waveform Math Operators | Algebra, Calculus, Advanced Math, Frequency Domain (FFT) |
| FFT Window Types | Rectangular, Hamming, Hanning, Kaiser-Bessel, Blackman-Harris, Gaussian, Flattop, TekExponential |
| Jitter and Eye Diagram Analysis | DPOJET Jitter and Eye Diagram Analysis (Standard) |
| Limit / Mask Testing | Standard |
Environmental
| Parameter | Value |
|---|---|
| Storage Temperature Range | -22 °C to 60 °C |
| Operating Humidity | 8% to 80% RH at up to 32 °C; 5% to 45% RH above 32 °C up to 45 °C |
| Operating Altitude | Up to 3,000 m (9,843 feet) |
| Storage Altitude | Up to 12,000 m (39,370 feet) |
| Operating Vibration | 0.22 g RMS (5 to 500 Hz) |
| Non-operating Vibration | 2.28 g RMS (5 to 500 Hz) |
| Operating Shock | 15 g (11 ms, half-sine) |
| Non-operating Shock | 25 g (11 ms, half-sine) |
| Cooling Clearance | 76 mm (3 in.) on top, left side, and rear |
Computer System
| Parameter | Value |
|---|---|
| Operating System | Windows 7 Ultimate (64-bit) |
| Processor | Intel Core i7 Quad-core (3.1 GHz) |
| System Memory | 8 GB (upgradable to 16 GB) |
Connectivity
| Parameter | Value |
|---|---|
| USB Ports | 1x USB 2.0 (front), 4x USB 2.0 (rear) |
| LXI Compliance | LXI Class C v1.3 |
| GPIB Interface | IEEE-488.2 |
| External Reference Input | 10 MHz (1.2 V to 4.8 V p-p) |
| External Reference Output | 10 MHz (>= 1.2 V p-p into 50 Ω) |
Triggering
| Parameter | Value |
|---|---|
| Auxiliary Trigger Input Connector | BNC (front panel) |
| Auxiliary Trigger Input Impedance | 50 Ω |
| Auxiliary Trigger Maximum Input Voltage | 5 V RMS |
| Hardware Serial Trigger Rate | Up to 6.25 Gbps |
Interfaces
| Parameter | Value |
|---|---|
| External Display Outputs | 1x DVI-I, 1x DisplayPort |
| LAN Interface Speed | 10/100/1000 Mbps |
| PCIe External Interface | PCI Express x4 |
| eSATA Port | 1x eSATA |
| Audio Ports | Line In, Line Out, Microphone |
Technology
Digital Serial Analyzer
Applications
High-speed serial data bus compliance testing, jitter and noise analysis, ultra-wideband signal characterization
Looking for the Tektronix DSA73304D?
Tell us what you need. We're building a network of equipment dealers and will get back to you if we can help source it — no obligation.
Selling this kind of equipment? Sell with us