The Tektronix MSO2024 is a 200 MHz, 4-channel mixed signal oscilloscope equipped with 16 integrated digital channels. It features a 1 GS/s sample rate, 1 Mpoint record length across all channels, and advanced waveform analysis tools including the Wave Inspector navigation system and FilterVu variable low-pass filter.

Specifications

General

ParameterValue
InterfacesUSB 2.0 Host (front), USB 2.0 Device (rear), LAN (optional via DPO2CONN), VGA (optional via DPO2CONN)
Display7 in. (180 mm) widescreen TFT-LCD, 480 × 234 pixels
Standard Warranty5 years

Physical

ParameterValue
Power Supply100 to 240 V ±10% (50/60 Hz at 100-240 V, 400 Hz ±10% at 100-120 V), Max 80 W
Operating Temperature0 to +50 °C
Dimensions (W×H×D)377 mm × 180 mm × 134 mm
Weight3.6

Analog Vertical System

ParameterValue
Analog Input Channels4
Analog Bandwidth (-3 dB)200 MHz
Calculated Rise Time (10% to 90%)2.1 ns
Input CouplingAC, DC, GND
Input Impedance1 MΩ ± 2% in parallel with 11.5 pF ± 2 pF
Input Sensitivity Range2 mV/div to 5 V/div
Vertical Resolution8 bits
Max Input Voltage (1 MΩ)300 Vrms CAT II with peaks ≤ ±450 V
DC Gain Accuracy±3% for 10 mV/div to 5 V/div, ±4% for 2 mV/div to 5 mV/div
Channel-to-Channel Isolation≥ 100:1 at ≤ 200 MHz
Offset Range (2 mV/div to 200 mV/div)±1 V
Offset Range (206 mV/div to 5 V/div)±10 V

Digital Vertical System

ParameterValue
Digital Channels16
Threshold GroupingPod 1 (D7-D0) and Pod 2 (D15-D8)
Threshold SelectionsTTL, CMOS, ECL, PECL, User Defined
Threshold Voltage Range-15 V to +15 V
Threshold Accuracy±(100 mV + 3% of threshold setting)
Input Impedance (Digital Probe)101 kΩ in parallel with 8 pF (P6316)
Max Input Voltage (Digital Probe)±40 V
Minimum Voltage Swing500 mVp-p
Minimum Detectable Pulse Width5 ns
Maximum Toggle Rate250 MHz

Horizontal System

ParameterValue
Maximum Real-time Sample Rate (Analog)1 GS/s
Maximum Sample Rate (Digital)1 GS/s (pod-independent)
Maximum Record Length (Analog Channels)1 Mpoint
Maximum Record Length (Digital Channels)1 Mpoint
Time Base Range2 ns/div to 100 s/div
Time Base Delay Range-10 divisions to 5000 s
Channel-to-Channel Deskew Range±100 ns
Time Base Accuracy±25 ppm

Trigger System

ParameterValue
Trigger ModesAuto, Normal, Single
Trigger CouplingAC, DC, HF Reject, LF Reject, Noise Reject
Trigger Holdoff Range20 ns to 8 s
Edge TriggeringRising, falling, or either slope on any channel
Runt TriggeringTrigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again
Logic TriggeringTrigger when any logical pattern of channels goes false or stays true for specified time
Setup and Hold TriggeringTrigger on violations of both setup time and hold time between clock and data on any input channels
Rise/Fall Time TriggeringTrigger on pulse edge rates that are faster or slower than specified
Video TriggeringTrigger on all lines, odd, even, or all fields on NTSC, PAL, and SECAM video signals
Serial Bus Triggering OptionsI2C, SPI, CAN, LIN, RS-232/422/485/UART (with appropriate hardware modules)
Trigger Level Range±4.96 divisions from center of screen

Acquisition Modes

ParameterValue
Sample ModeAcquire sampled values
Peak Detect ModeAcquire narrow glitches down to 3.6 ns (analog) at all sweep speeds
Averaging ModeAverage 2 to 512 waveforms
Roll ModeScrolls waveforms right to left at sweep speeds slower than or equal to 40 ms/div

Waveform Analysis & Measurements

ParameterValue
Automatic Measurements29 automatic measurements
Math FunctionsArithmetic (Add, Subtract, Multiply) and FFT
FFT Window TypesHanning, Rectangular, Hamming, Blackman-Harris
Search and Mark CapabilitiesWave Inspector® automatic search, marking, and navigation

Display & User Interface

ParameterValue
Display TypeWidescreen TFT-LCD color
Display Size (Diagonal)7 in (180 mm)
Display Resolution480 × 234 pixels (WQVGA)
GraticulesFull, Grid, Crosshair, Frame
Waveform Update Rate5,000 wfm/s

Optional Integrated Instruments

ParameterValue
Frequency Counter Resolution6-digit trigger frequency counter

Connectivity and Interfaces

ParameterValue
USB Host Ports (Front)1x USB 2.0 Host
USB Device Port (Rear)1x USB 2.0 Device
LAN Port (Ethernet)Optional (via DPO2CONN connectivity module)
External Video Output PortOptional (via DPO2CONN connectivity module)
Probe InterfaceTekVPI Probe Interface

Power Specifications

ParameterValue
Power Source Voltage100 to 240 V ±10%
Power Source Frequency45 Hz to 440 Hz (100 to 120 V), 45 Hz to 66 Hz (120 to 240 V)
Power Consumption80 W maximum

Environmental & Compliance

ParameterValue
Non-Operating Temperature Range-40 to +71 °C
Operating Humidity RangeHigh: 5% to 60% RH (at +40 to +50 °C); Low: 5% to 90% RH (at 0 to +40 °C)
Operating AltitudeUp to 3,000 m (9,843 ft)
Non-Operating AltitudeUp to 12,000 m (39,370 ft)
Electromagnetic Compatibility (EMC)EC Council Directive 2004/108/EC
Safety CertificationsUL61010-1:2004, CAN/CSA-C22.2 No. 61010-1:2004, EN61010-1:2001

Physical Characteristics

ParameterValue
Width377 mm (14.9 in)
Height180 mm (7.1 in)
Depth134 mm (5.3 in)
Weight (Net)3.6 kg (7.9 lbs)
Weight (Shipping)6.2 kg (13.7 lbs)
Kensington Lock SlotStandard rear-panel slot

Vertical System

ParameterValue
Analog Bandwidth Limit20 MHz

Interfaces

ParameterValue
GPIB InterfaceOptional (via TEK-USB-488 adapter)
Ethernet and Video Out PortsOptional (via DPO2CONN connectivity module)

Waveform Measurements

ParameterValue
Measurement StatisticsMean, Minimum, Maximum, Standard Deviation
Measurement GatingScreen or Waveform Cursor

Waveform Math

ParameterValue
Math OperatorsAdd, Subtract, Multiply

Probes

ParameterValue
Standard Digital ProbeP6316 16-channel digital probe and accessory kit

Included Accessories

ParameterValue
Standard Analog Probes4x P2221 (200 MHz, 1x/10x passive probes)

Wave Inspector

ParameterValue
Wave Inspector ControlsDedicated front-panel controls for zoom, pan, play/pause, active search, and user marks

Expansion Slots

ParameterValue
Application Module Slots2 slots on the side of the instrument for optional application modules

Acquisition System

ParameterValue
Envelope ModeMin/max envelope of 2 to 512 or infinite acquisitions

Technology

Digital Phosphor (DPO/MSO)

Applications

Mixed-Signal Debug, Embedded Design, Power Measurement, Serial Troubleshooting

Looking for the Tektronix MSO2024?

Tell us what you need. We're building a network of equipment dealers and will get back to you if we can help source it — no obligation.

Selling this kind of equipment? Sell with us