The Tektronix MSO2024B is a 200 MHz, 4-channel mixed signal oscilloscope from the MSO/DPO2000B Series. Featuring 16 integrated digital channels, a sample rate of 1 GS/s on all channels, and a 1 Mpoint record length, it provides robust debug capabilities for analog and digital systems. Its advanced Wave Inspector® navigation, FilterVu™ variable low-pass filter, and serial bus triggering capabilities make it a versatile tool for complex embedded designs.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | USB 2.0 host (front), USB 2.0 device (rear), LAN (optional via DPO2CONN), Video Out (optional via DPO2CONN) |
| Display | 7-inch (180 mm) widescreen TFT-LCD, 480 × 234 pixels (WQVGA) |
| Warranty | 5 years |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100 to 240 V ±10% (50/60 Hz), 115 V ±10% (400 Hz), 80 W max |
| Operating Temperature | 0 °C to +50 °C |
| Dimensions (W×H×D) | 377 mm × 180 mm × 134 mm |
| Weight | 3.6 kg |
Analog Vertical System
| Parameter | Value |
|---|---|
| Analog Input Channels | 4 |
| Analog Bandwidth (-3 dB) | 200 MHz |
| Calculated Rise Time (10% to 90%) | 2.1 ns |
| Hardware Bandwidth Limits | 20 MHz |
| Input Coupling | AC, DC, GND |
| Input Impedance | 1 MΩ ±2% parallel with 11.5 pF ±2 pF |
| Vertical Resolution | 8 bits |
| Maximum Input Voltage (1 MΩ) | 300 V rms with peaks ≤ ±450 V |
Digital Vertical System
| Parameter | Value |
|---|---|
| Digital Channels | 16 |
| Threshold Selections | TTL, CMOS, ECL, PECL, User Defined |
| User-Defined Threshold Range | -15 V to +15 V |
| Maximum Input Voltage (Digital) | ±40 V |
| Maximum Input Dynamic Range | ±10 V about threshold |
| Minimum Voltage Swing | 500 mVpk-pk |
| Input Impedance (Digital Probe) | 101 kΩ |
| Probe Loading | 8 pF |
| Vertical Resolution (Digital) | 1 bit |
Horizontal System
| Parameter | Value |
|---|---|
| Maximum Real-time Sample Rate (Analog) | 1 GS/s (all channels) |
| Maximum Record Length (Analog) | 1 Mpoint (all channels) |
| Maximum Sample Rate (Digital - Channels D7-D0) | 1 GS/s (1 ns resolution) (8 channels) |
| Maximum Sample Rate (Digital - Channels D15-D8) | 500 MS/s (2 ns resolution) (16 channels) |
| Maximum Record Length (Digital) | 1 Mpoint (all channels) |
| Minimum Detectable Pulse Width | 5 ns |
| Channel-to-Channel Skew (Digital) | 2 ns (typical) |
| Time Base Range | 2 ns/div to 100 s/div |
| Channel-to-Channel Deskew Range | ±100 ns |
| Maximum Duration Captured at Highest Sample Rate | 1 ms |
| Time Base Accuracy | ±25 ppm |
| Timebase Delay Time Range | -10 divisions to 5000 s |
Trigger System
| Parameter | Value |
|---|---|
| Main Trigger Modes | Auto, Normal, Single |
| Trigger Holdoff Range | 20 ns to 8 s |
| Trigger Types | Edge, Pulse width, Runt, Logic, Setup and hold, Rise/Fall time, Video, Parallel |
| Optional Serial Bus Triggering & Analysis | I2C, SPI, CAN, LIN, RS-232/422/485/UART |
| Trigger Sensitivity (≤10 MHz) | 0.4 division from DC to 50 MHz |
| Trigger Sensitivity (10 MHz to 100 MHz) | 0.6 division from 50 MHz to 100 MHz |
| Trigger Sensitivity (100 MHz to 200 MHz) | 0.8 division from 100 MHz to 200 MHz |
| Trigger Level Range | ±8 divisions from center of screen |
Acquisition Modes
| Parameter | Value |
|---|---|
| Supported Acquisition Modes | Sample, Peak detect, Averaging, Roll |
Waveform Analysis & Measurements
| Parameter | Value |
|---|---|
| Automatic Measurements | 29 automated measurements |
| Measurement Cursors | Waveform and screen |
| Waveform Math | Add, subtract, and multiply waveforms |
| FFT Analysis | Spectral magnitude |
| FFT Vertical Scale | Linear RMS, dBV RMS |
| FFT Window Types | Rectangular, Hamming, Hanning, Blackman-Harris |
Connectivity and Interfaces
| Parameter | Value |
|---|---|
| USB Host Ports | 1x USB 2.0 (front panel) |
| USB Device Ports | 1x USB 2.0 high-speed (rear panel) |
| LAN Port (Ethernet) | Optional 10/100 Ethernet (via DPO2CONN) |
| External Video Output | Optional (via DPO2CONN) |
| Auxiliary Input | No |
| Probe Compensator Output | Yes |
| Probe Interface | TekVPI Probe Interface |
Vertical System - Analog Channels
| Parameter | Value |
|---|---|
| Vertical Sensitivity Range | 2 mV/div to 5 V/div |
| DC Gain Accuracy | ±3% for 10 mV/div to 5 V/div, ±4% for 2 mV/div to 5 mV/div |
Acquisition System
| Parameter | Value |
|---|---|
| Maximum Waveform Capture Rate | 5,000 wfm/s |
Environmental
| Parameter | Value |
|---|---|
| Operating Altitude | Up to 3,000 m (9,843 ft.) |
| Non-operating Altitude | Up to 12,000 m (39,370 ft.) |
| Non-operating Temperature | -40 °C to +71 °C |
| Operating Humidity | High: 60% to 90% RH at up to +40 °C; Low: 10% to 60% RH up to +50 °C |
| Non-operating Humidity | High: 30% to 90% RH at up to +40 °C; Low: 10% to 60% RH up to +55 °C |
Display
| Parameter | Value |
|---|---|
| Display Resolution | 480 × 234 pixels (WQVGA) |
| Display Type | 7-inch (180 mm) widescreen TFT-LCD |
Digital Channels
| Parameter | Value |
|---|---|
| Digital Threshold Accuracy | ±(100 mV + 3% of threshold setting) |
| Standard Digital Probe Model | P6316 |
Interfaces
| Parameter | Value |
|---|---|
| LXI Compliance | LXI Class C, Version 1.4 (requires optional DPO2CONN module) |
Compliance
| Parameter | Value |
|---|---|
| Safety Standards | UL61010-1:2004, CAN/CSA-C22.2 No. 61010-1:2004, EN61010-1:2001, IEC61010-1:2001 |
| Electromagnetic Compatibility (EMC) | 2004/108/EC, EN61326-1:2006 Class A, CNS13438 |
Technology
Mixed Signal Oscilloscope
Applications
Embedded Design, Mixed Signal Debug, Serial Bus Analysis, Education