The Tektronix MSO71604C is a high-performance 16 GHz, 4-channel mixed signal oscilloscope from the MSO70000C series. It features a maximum real-time sampling rate of 100 GS/s on 2 channels (50 GS/s on all 4 channels) and includes 16 logic channels with an 80 ps timing resolution. Designed for debugging and validating high-speed digital designs, it integrates iCapture multiplexing, Pinpoint® triggering, and embedded serial bus analysis capabilities.

Specifications

General

ParameterValue
InterfacesUSB 2.0 Host/Device, LAN (10/100/1000 Base-T), GPIB, LXI Class C, DVI-D, VGA, Auxiliary Out, External Reference In/Out
Display12.1-inch active-matrix color TFT-LCD touchscreen, 1024 x 768 (XGA)

Physical

ParameterValue
Power Supply100 to 240 V AC +/-10% (50/60 Hz), 115 V AC +/-10% (400 Hz), <1200 VA maximum power consumption
Operating Temperature5 to 45
Dimensions (W×H×D)468 mm x 298 mm x 489 mm
Weight24.1

Analog Vertical System

ParameterValue
Analog Input Channels4
User-Selectable DSP Enhanced Bandwidth16 GHz
Hardware Analog Bandwidth (-3 dB)16 GHz (typical)
Calculated Rise Time (10% to 90%)24.5 ps (typical)
Input Coupling50 Ohm: DC
Input Impedance50 Ohm +/-1.5%
Vertical Resolution8 bit (11 bit with averaging)

Digital Vertical System

ParameterValue
Digital Channels16
Digital Channel Analog Bandwidth2.5 GHz with P6780 logic probe, 350 MHz with P6717 logic probe
Digital Channel Vertical Resolution1 bit
Logic Threshold Range-2 to +4.5 V with P6780, -1.5 to +4.0 V with P6717
Digital Channel Maximum Input Voltage+/-15 V non-destruct
Minimum Detectable Pulse Width<400 ps
Maximum Number of Buses16
Number of Channels per BusUp to 24 (16 logic, 4 analog, 4 math)

Horizontal System

ParameterValue
Maximum Real-Time Sample Rate (2 Channels)100 GS/s
Maximum Real-Time Sample Rate (4 Channels)50 GS/s
Maximum Sample Rate (Digital Channels)12.5 GS/s (all channels)
Digital Timing Resolution80 ps
Time Resolution (ET/IT Mode)100 fs
Channel-to-Channel Deskew Range+/-75 ns
Time Base Delay Range-5.0 ks to 1.0 ks
Maximum Record Length (Standard)31.25 M on all 4 channels
Maximum Record Length (Digital Channels with option)250 M on all channels
Maximum Duration at Highest Real-Time Resolution0.625 ms (with standard memory)
Timebase Accuracy±1.5 ppm (initial), <1 ppm/year (aging)
Equivalent Time Sample Rate10 TS/s

Trigger System

ParameterValue
Trigger ModesAuto, Normal, Single
Trigger SequencesMain, Delayed by Time, Delayed by Events, Reset by Time, Reset by State, Reset by Transition
Trigger Types (A Event & Delayed B Event)Edge, Glitch, Runt, Width, Transition Time, Timeout, Pattern, State, Setup/Hold, Window
Logic State QualificationUp to 2 channels (except Edge, Pattern, and State types)
Digital A then Analog B TriggeringSupported; identifies digital state/pattern then waits for analog event
Real-Time Serial Pattern Triggering RateUp to 6.25 Gb/s (hardware-based, NRZ or 8b/10b patterns)
Pinpoint TriggeringSupported
Trigger Jitter<100 fs RMS (typical, Edge trigger with DSP)

Acquisition Modes

ParameterValue
Sample Acquisition ModeAcquires and displays sampled values
Averaging ModeFrom 2 to 10,000 waveforms included in average
Envelope ModeFrom 1 to 2x10^9 waveforms included in min-max envelope
Hi-Res ModeReal-time boxcar averaging reduces random noise and increases resolution
FastAcq ModeOptimized for dynamic signal analysis and infrequent event capture
Maximum FastAcq Waveform Capture Rate>300,000 wfms/s on all 4 channels simultaneously
FastFrame Segmented MemoryAcquisition memory split into segments; maximum trigger rate >310,000 wfms/s
Waveform Database ModeAccumulates 3D array of amplitude, time, and counts

Waveform Analysis & Measurements

ParameterValue
iCapture (Digital to Analog Routing)Routes any 4 of 16 logic channels to analog acquisition system for fine analog detail view
Embedded Serial Bus Decoding and TriggeringI2C, SPI
Search & MarkWaveform pattern matching and software triggers for signals of interest

Vertical System (Analog)

ParameterValue
DC Gain Accuracy±2% of full scale
Vertical Sensitivity Range10 mV/div to 1 V/div
Effective Number of Bits (ENOB)5.1 bits (typical at 16 GHz, 50 mV/div, DSP on)

Vertical System (Digital)

ParameterValue
Digital Probe Input Impedance20 kΩ || 3 pF (with P6717A or P6750 digital probe)

Computer System

ParameterValue
Operating SystemWindows 7 Ultimate (64-bit)
System Memory8 GB

Environmental

ParameterValue
Operating AltitudeUp to 3,000 m (9,843 ft.)
Non-operating AltitudeUp to 12,000 m (39,370 ft.)
Operating Shock15 g, 11 ms half-sine
Non-Operating Temperature-20 °C to +60 °C
Operating Humidity8% to 80% RH (at or below +32 °C), non-condensing
Non-Operating Humidity5% to 95% RH (at or below +30 °C), non-condensing
Operating Vibration0.22 g RMS (5 Hz to 500 Hz)
Non-Operating Vibration2.28 g RMS (5 Hz to 500 Hz)

Compliance

ParameterValue
Safety StandardsUL61010-1, CSA 61010-1, EN61010-1, IEC61010-1
EMC StandardsEN61326-1, EN61326-2-1

Vertical System

ParameterValue
Rise Time (20% to 80%)18 ps (typical)

Inputs & Outputs

ParameterValue
Analog Input ConnectorsTekConnect
Digital Probe Connector17-channel high-density connector

Technology

Mixed Signal Oscilloscope

Applications

High-speed digital debug, DDR memory, ASICs, FPGAs, SOCs, and digital RF

Looking for the Tektronix MSO71604C?

Tell us what you need. We're building a network of equipment dealers and will get back to you if we can help source it — no obligation.

Selling this kind of equipment? Sell with us