The Tektronix TDS1002 is a 60 MHz, 2-channel digital storage oscilloscope from the TDS1000 Series, offering a real-time sample rate of 1.0 GS/s on each channel, a monochrome LCD display, and an exceptionally lightweight, compact benchtop design.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | RS-232, GPIB, Centronics (via optional TDS2CMA or TDS2MEM module) |
| Display | 1/4 VGA (320 x 240) passive-matrix monochrome LCD with backlit illumination |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 90 to 250 VAC, 45 to 440 Hz (90 to 127 VAC), 45 to 62 Hz (120 to 250 VAC), 20 W maximum power consumption |
| Operating Temperature | 0 to +50 |
| Dimensions (W×H×D) | 323.8 x 151.4 x 124.5 |
| Weight | 2.0 |
Vertical System
| Parameter | Value |
|---|---|
| Analog Bandwidth | 60 MHz |
| Number of Channels | 2 |
| Calculated Rise Time | 5.8 ns |
| Input Coupling | AC, DC, GND |
| Input Impedance | 1 MΩ ± 2% in parallel with 20 pF ± 3 pF |
| Input Sensitivity Range | 2 mV/div to 5 V/div |
| Vertical Resolution | 8 bits |
| Maximum Input Voltage | 300 V RMS CAT II; derate at 20 dB/decade above 100 kHz to 13 V peak AC at 3 MHz and above |
| DC Gain Accuracy | ±3% for Sample or Average acquisition mode |
| Offset Range | ±2 V (2 mV to 200 mV/div); ±50 V (>200 mV to 5 V/div) |
| Hardware Bandwidth Limits | 20 MHz |
| Channel-to-Channel Isolation | >= 100:1 at 30 MHz |
| Common Mode Rejection Ratio (CMRR) | >= 100:1 at 60 Hz, >= 10:1 at 10 MHz (with equal Volts/div settings) |
| Supported Probe Attenuation Factors | 1x, 10x, 100x, 1000x |
Horizontal System
| Parameter | Value |
|---|---|
| Timebase Range | 5 ns/div to 50 s/div |
| Timebase Accuracy | ±50 ppm |
| Display Format | YT, XY |
Acquisition System
| Parameter | Value |
|---|---|
| Maximum Real-Time Sample Rate | 1.0 GS/s |
| Maximum Record Length | 2.5k points |
| Acquisition Modes | Sample, Peak Detect (12 ns high-frequency glitches), Average (4, 16, 64, 128 waveforms) |
| Peak Detect Glitch Capture | 12 ns (typical) at all timebase settings from 5 µs/div to 50 s/div |
Trigger System
| Parameter | Value |
|---|---|
| Trigger Sources | CH1, CH2, Ext, Ext/5, AC Line |
| Trigger Modes | Auto, Normal, Single Sequence |
| Trigger Coupling | AC, DC, Noise Reject, HF Reject, LF Reject |
| Trigger Holdoff Range | 500 ns to 10 s |
| Standard Trigger Types | Edge, Video (Line or Field, NTSC/PAL/SECAM), Pulse Width (33 ns to 10 s) |
| External Trigger Input Impedance | 1 MΩ ±2% in parallel with 20 pF ±3 pF |
| External Trigger Maximum Input Voltage | 300 V RMS CAT II (derating at 20 dB/decade above 100 kHz to 13 V peak AC at 3 MHz and above) |
| Edge Trigger Sensitivity (Internal) | 0.35 div from DC to 10 MHz, 1 div from 10 MHz to 60 MHz |
| Edge Trigger Sensitivity (External) | 50 mV from DC to 10 MHz, 150 mV from 10 MHz to 60 MHz |
| Video Trigger Signal Formats | NTSC, PAL, SECAM |
Waveform Measurements and Analysis
| Parameter | Value |
|---|---|
| Automatic Measurements | 11 parameters: Period, Frequency, +Width, -Width, Rise Time, Fall Time, Max, Min, Peak-to-Peak, Mean, Cycle RMS |
| Waveform Math Operators | Add, Subtract, FFT |
| FFT Window Types | Hanning, Flat Top, Rectangular |
| Non-Volatile Storage | Two reference waveforms, 10 front-panel setup states |
Environmental and Compliance
| Parameter | Value |
|---|---|
| Storage Temperature Range | -40 °C to +71 °C |
| Operating Humidity | Up to 90% RH at or below +30 °C; up to 60% RH up to +50 °C |
| Operating Altitude | Up to 3,000 m |
| Electromagnetic Compatibility | Meets Directive 89/336/EEC, EN 55011 Class A, EN 50082-1 |
Physical & Environmental
| Parameter | Value |
|---|---|
| Cooling System | Convection cooled (fanless) |
| Vibration (Operating) | 0.31 g RMS from 5 Hz to 500 Hz, 10 minutes per axis |
| Shock (Operating) | 50 g, 11 ms, half-sine |
Interfaces & Connectivity
| Parameter | Value |
|---|---|
| Optional Connectivity Modules | TDS2CMA (GPIB, RS-232, Centronics) or TDS2MEM (CompactFlash, USB) |
Display
| Parameter | Value |
|---|---|
| Display Resolution | 320 × 240 pixels |
Measurements
| Parameter | Value |
|---|---|
| Cursor Measurements | Voltage difference (ΔV), time difference (Δt), and 1/Δt (frequency) |
Storage
| Parameter | Value |
|---|---|
| Non-Volatile Setup Storage Capacity | 10 internal setups |
| Non-Volatile Waveform Storage Capacity | 2 reference waveforms |
Power
| Parameter | Value |
|---|---|
| Power Consumption | 30 W maximum |
Technology
Digital Storage Oscilloscope (DSO)
Applications
Electronic Design, Troubleshooting, Education, and Manufacturing Test