The Tektronix TDS210 is a classic, highly reliable 2-channel Digital Storage Oscilloscope (DSO) featuring a 60 MHz bandwidth and a 1.0 GS/s real-time sample rate across all channels. Highly valued for its portable design, intuitive interface, and durable build, it remains a popular choice for educational, troubleshooting, and general bench-test applications.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | None standard; GPIB, RS-232, and Centronics printer interfaces available via optional modules (TDS2CMA / TDS2MM) |
| Display | Backlit LCD (monochrome), 320 × 240 pixels |
| Warm-up Time | 20 minutes |
Physical
| Parameter | Value |
|---|---|
| Operating Temperature | 0 to +50 °C |
| Dimensions (W×H×D) | 304.8 mm × 151.4 mm × 120.7 mm |
| Weight | 1.5 kg |
Vertical System (Acquisition)
| Parameter | Value |
|---|---|
| Number of Channels | 2 |
| Analog Bandwidth (-3 dB) | 60 MHz |
| Calculated Rise Time | ~5.8 ns |
| Vertical Resolution | 8 bits |
| Vertical Sensitivity Range | 2 mV/div to 5 V/div in 1-2-5 sequence |
| Input Impedance | 1 MΩ ±2% in parallel with 20 pF ±3 pF |
| Input Coupling | AC, DC, GND |
| Maximum Input Voltage (1M Ohm) | 300 V RMS CAT II |
| Hardware Bandwidth Limiters | 20 MHz |
Horizontal System (Timebase)
| Parameter | Value |
|---|---|
| Max Real-Time Sample Rate | 1.0 GS/s on all channels |
| Max Record Length (Memory Depth) | 2500 points |
| Timebase Range | 5 ns/div to 5 s/div |
| Number of Averages | 4, 16, 64, 128 |
Trigger System
| Parameter | Value |
|---|---|
| Trigger Modes | Auto, Normal, Single |
| Trigger Coupling | AC, DC, Noise Reject, HF Reject, LF Reject |
| Trigger Sources | CH1, CH2, EXT, EXT/5, AC Line |
| Trigger Types | Edge, Video |
| Video Trigger Formats | NTSC, PAL, SECAM |
| Trigger Level Range (Internal) | ±8 divisions from screen center |
| External Trigger Input Impedance | 1 MΩ ±2% in parallel with 20 pF ±3 pF |
| External Trigger Maximum Input Voltage | 300 V RMS CAT II |
Measurements and Waveform Analysis
| Parameter | Value |
|---|---|
| Automatic Measurements | Period, Frequency, Cycle RMS, Mean, Peak-to-Peak |
| Cursor Types | Voltage, Time |
| Cursor Measurements | ΔV, Δt, 1/Δt |
| Waveform Math Operations | Addition (+), Subtraction (-) |
| Waveform Memory | 2 reference waveforms, 5 front-panel setups |
Display and User Interface
| Parameter | Value |
|---|---|
| Graticule Settings | 8 × 10 divisions |
Connectivity and Expansion
| Parameter | Value |
|---|---|
| Probe Compensator Output | approx. 5 V into ≥1 MΩ load @ 1 kHz |
| Extension Slot | Supports optional modules (TDS2CMA / TDS2MM) for RS-232, GPIB, and Centronics printer interfaces |
Environmental and Safety Standards
| Parameter | Value |
|---|---|
| Storage Temperature Range | -20 °C to +60 °C |
| Operating Altitude Limit | Up to 2,000 m |
| Storage Altitude Limit | Up to 15,000 m |
Standard Accessories and Options
| Parameter | Value |
|---|---|
| Standard Probes Included | Two P2100 10X passive probes |
| Option Modules Available | TDS2CMA (Communications), TDS2MM (Measurement Extension) |
Vertical System
| Parameter | Value |
|---|---|
| Channel-to-Channel Isolation | ≥ 100:1 at 60 MHz (with equal volts/div settings) |
Storage & Memory
| Parameter | Value |
|---|---|
| Setup Memory | 5 internal front-panel setups |
Power & Environmental
| Parameter | Value |
|---|---|
| Power Consumption | Less than 20 W |
| Cooling Method | Convection cooled (fanless) |
Certifications & Compliance
| Parameter | Value |
|---|---|
| Safety Standards | UL3111-1, CSA C22.2 No. 1010.1, EN61010-1 |
Display
| Parameter | Value |
|---|---|
| Display Resolution | 320 × 240 pixels |
Environmental
| Parameter | Value |
|---|---|
| Pollution Degree | Pollution Degree 2 (indoor use only) |
| Installation Category | CAT II |
Technology
Digital Storage Oscilloscope (DSO)
Applications
Electronic testing, waveform analysis, educational labs, repair and maintenance