The Tektronix TDS3034 is a 300 MHz, 4-channel Digital Phosphor Oscilloscope (DPO) from the TDS3000 Series. It features a maximum real-time sample rate of up to 2.5 GS/s, 9-bit vertical resolution, and a full VGA color LCD display. It includes standard advanced triggering, Fast Fourier Transform (FFT) capabilities, and built-in support for active, differential, and current probes.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | Centronics port (Standard); RS-232, GPIB, LAN, or VGA (via optional modules) |
| Display | Full VGA Color LCD |
| User Interface | Multi-Language User Interface with QuickMenu Mode |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100 to 240 VAC, 47 to 63 Hz; 115 VAC, 360 to 440 Hz; 75 W max |
| Operating Temperature | 0 to +50 |
| Dimensions (W×H×D) | 375 × 176 × 149 |
| Weight | 3.2 |
Vertical System
| Parameter | Value |
|---|---|
| Bandwidth | 300 MHz |
| Number of Analog Channels | 4 |
| Vertical Resolution | 9-bit |
| Vertical Sensitivity (1 MΩ) | 1 mV/div to 10 V/div |
| Vertical Sensitivity (50 Ω) | 1 mV/div to 1 V/div |
| DC Gain Accuracy | ± 2% |
| Bandwidth Limit Options | 20 MHz, 150 MHz |
| Maximum Input Voltage (1 MΩ) | 150 V RMS CAT I (300 V RMS CAT II with standard 10X probe) |
| Maximum Input Voltage (50 Ω) | 5 V RMS (with peaks < ± 30 V) |
Horizontal System
| Parameter | Value |
|---|---|
| Maximum Real-Time Sample Rate | 2.5 GS/s |
| Record Length | 10,000 points per channel |
| Time Base Range | 2 ns/div to 10 s/div |
| Time Base Accuracy | ±20 ppm |
Trigger System
| Parameter | Value |
|---|---|
| Trigger Sources | CH1, CH2, CH3, CH4, AC Line |
Waveform Measurements
| Parameter | Value |
|---|---|
| Automatic Measurements | 21 |
Connectivity and Interfaces
| Parameter | Value |
|---|---|
| Supported Probes | Active, Differential, and Current Probes (with automatic scaling and units) |
Storage
| Parameter | Value |
|---|---|
| Removable Storage | Built-in Floppy Disk Drive |
Input
| Parameter | Value |
|---|---|
| Input Coupling | AC, DC, GND |
Power
| Parameter | Value |
|---|---|
| Battery Operation | Up to 2 hours with optional TDS3BAT rechargeable battery pack |
| Power Consumption | 75 W max |
Environmental
| Parameter | Value |
|---|---|
| Non-operating Temperature | -40 °C to +71 °C |
| Operating Altitude | Up to 3,000 m (10,000 ft) |
| Non-operating Altitude | Up to 15,000 m (50,000 ft) |
| Operating Vibration | 0.31 g RMS from 5 to 500 Hz |
| Non-operating Vibration | 2.46 g RMS from 5 to 500 Hz |
| Non-operating Shock | 50 g, 11 ms, half-sine |
Compliance
| Parameter | Value |
|---|---|
| Safety Compliance | UL3111-1, CSA1010.1, EN61010-1, IEC61010-1 |
| Electromagnetic Compatibility (EMC) | Meets EN61326 Class A, Annex D |
Performance
| Parameter | Value |
|---|---|
| Waveform Capture Rate | 3,600 wfms/s |
| Acquisition Modes | Sample, Peak Detect, Envelope, Average |
| Peak Detect Glitch Capture | Down to 1 ns |
Display
| Parameter | Value |
|---|---|
| Display Resolution | 640 x 480 pixels (VGA) |
Technology
Digital Phosphor Oscilloscope (DPO)