SpecAtlasHub

TDS3054C

Tektronix*misc

The Tektronix TDS3054C is a 500 MHz, 4-channel Digital Phosphor Oscilloscope (DPO) belonging to the popular TDS3000C Series. Combining a continuous waveform capture rate of 3,600 wfms/s with a real-time sample rate of 5 GS/s on all channels, it easily exposes elusive transients and signal anomalies. The instrument is designed for portability and ease of use, featuring front-panel USB storage, PC connectivity via Ethernet and USB device ports, and an optional internal lithium-ion battery for up to three hours of cordless operation.

Signal AnalysisSignal Integrity

Specifications

General

ParameterValue
InterfacesUSB 2.0 Host (Front), USB 2.0 Device (Rear), 10/100Base-T Ethernet (GPIB, RS-232, and VGA available via optional TDS3GV module)
Display6.5-inch (165.1 mm) active-matrix TFT color LCD, 640 x 480 (VGA) resolution
Supported LanguagesEnglish, French, German, Italian, Spanish, Portuguese, Russian, Japanese, Korean, Simplified Chinese, Traditional Chinese
Included Probes4 x P5050 500 MHz 10X passive probes

Physical

ParameterValue
Power Supply100 to 240 VRMS, 50/60 Hz; 115 VRMS, 400 Hz (75 W maximum)
Operating Temperature+5 °C to +50 °C
Dimensions (W×H×D)375 × 176 × 149
Weight3.2

Vertical System

ParameterValue
Bandwidth500 MHz
Analog Channels4
Calculated Rise Time700 ps
Vertical Resolution9 bits (typical)
DC Gain Accuracy±2%
Input CouplingAC, DC, GND
Input Impedance1 MΩ in parallel with 13 pF, or 50 Ω
Vertical Sensitivity Range (1 MΩ)1 mV/div to 10 V/div
Vertical Sensitivity Range (50 Ω)1 mV/div to 1 V/div
Maximum Input Voltage (1 MΩ)150 VRMS CAT I (300 V CAT II with standard 10X probe)
Maximum Input Voltage (50 Ω)5 VRMS, with peaks ≤ ±30 V
Hardware Bandwidth Limits20 MHz, 150 MHz
Channel-to-Channel Isolation≥100:1 at 100 MHz; ≥30:1 at rated bandwidth

Horizontal System

ParameterValue
Maximum Sample Rate5 GS/s Real-time on all channels
Record Length10,000 points on all channels
Time Base Range1 ns/div to 10 s/div
Time Base Accuracy±20 ppm

Acquisition System

ParameterValue
Waveform Capture Rate3,600 wfms/s (Continuous DPO)
Acquisition ModesSample, Peak Detect, Averaging, Envelope
Peak Detect ModeCaptures high frequency and random glitches down to 1 ns

Trigger System

ParameterValue
Trigger SourceCH1, CH2, CH3, CH4, EXT, EXT/10, AC Line
Trigger TypesEdge, Video, Logic, Pulse (additional available via optional modules)
Trigger CouplingDC, AC, HF Reject, LF Reject, Noise Reject
Video Trigger StandardsNTSC, PAL, SECAM

Waveform Measurements and Math

ParameterValue
Automatic Measurements25
Math FunctionsAdd, Subtract, Multiply, Divide
FFT FunctionsStandard
Waveform Anomaly DetectionWaveAlert®

Connectivity and Input/Output

ParameterValue
Probe InterfaceTekProbe® Level II Interface (supports active, differential, and current probes for automatic scaling and units)

Power Source

ParameterValue
Battery Power OptionsOptional Internal Battery (TDS3BATC Lithium-ion)
Battery Operating TimeUp to 3 hours

Ordering Information and Options

ParameterValue
Application ModulesAdvanced Analysis, Limit Testing, Telecommunications Mask Testing, Extended Video, 601 Serial Digital Video

Measurements

ParameterValue
Cursor MeasurementsΔV, ΔT, 1/ΔT (Frequency)

Display

ParameterValue
Display Resolution640 x 480 pixels (VGA)

Power

ParameterValue
Mains Voltage Range100 V to 240 V RMS
Power Consumption75 W maximum

Environmental

ParameterValue
Storage Temperature-40 °C to +71 °C
Operating AltitudeUp to 3,000 m (9,843 ft)
Non-operating AltitudeUp to 15,000 m (49,212 ft)
Random Vibration (Operating)0.31 GRMS, 5 to 500 Hz
Random Vibration (Non-operating)2.46 GRMS, 5 to 500 Hz
Shock50 g, 11 ms, half sine

Interfaces

ParameterValue
Network Interface10/100Base-T Ethernet (RJ-45)
LXI ComplianceLXI Class C

Compliance

ParameterValue
Safety StandardsUL61010-1, CAN/CSA C22.2 No. 61010.1, EN61010-1
Electromagnetic Compatibility (EMC)EN61326-1

Technology

Digital Phosphor Oscilloscope (DPO)

Applications

General Purpose Test & Measurement