SpecAtlasHub

TDS3064B

TektronixDigital

The Tektronix TDS3064B is a 4-channel, 600 MHz Digital Phosphor Oscilloscope (DPO) from the TDS3000B series. Combining a high-speed real-time sample rate of 5.0 GS/s per channel with a continuous waveform capture rate of 3,600 wfms/s and standard Ethernet connectivity, it provides exceptional insight into fast, complex signals in a lightweight, battery-capable package.

Electronic TestingSignal AnalysisSignal Integrity

Specifications

Trigger System

ParameterValue
Internal Trigger Level Range±8 divisions from center of screen
Trigger Holdoff Range250 ns to 8 s

Waveform Measurements and Analysis

ParameterValue
Automatic Measurements25 standard measurements (including Period, Frequency, +Width, -Width, Rise Time, Fall Time, +Duty Cycle, -Duty Cycle, +Overshoot, -Overshoot, High, Low, Max, Min, Peak-to-Peak, Amplitude, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Phase, Delay)
Cursor TypesAmplitude, Time
Waveform Math OperatorsAdd, Subtract, Multiply, Divide
FFT WindowsRectangular, Hanning, Hamming, Blackman-Harris

Display and User Interface

ParameterValue
Display TypeColor active-matrix TFT LCD
Display Size6.4 in (162.6 mm) diagonal
Display Resolution640 x 480 pixels (VGA)

Connectivity and Interfaces

ParameterValue
LAN InterfaceBuilt-in 10Base-T Ethernet port (RJ-45)
Printer PortCentronics parallel port (DB-25)
VGA OutputVia optional TDS3GV module
GPIB InterfaceVia optional TDS3GV module (IEEE 488.2)
RS-232 InterfaceVia optional TDS3GV module (DB-9 male)

Storage and Memory

ParameterValue
Internal Waveform Storage4 waveforms
Internal Setup Storage10 setups
Removable Storage Media Type3.5-inch 1.44 MB floppy disk drive

Power System

ParameterValue
Battery Operation SupportOptional rechargeable Li-Ion battery pack (TDS3BATB)
Battery Run TimeUp to 3 hours (continuous use without line power)

Environmental and Safety

ParameterValue
Non-Operating Temperature-20 °C to +60 °C
Relative Humidity RangeUp to 95% RH at or below +30 °C, up to 45% RH up to +50 °C
Operating AltitudeUp to 3,000 m (10,000 ft)
Non-Operating AltitudeUp to 15,000 m (50,000 ft)

Physical Characteristics

ParameterValue
Instrument Width375 mm (14.8 in)
Instrument Height176 mm (6.9 in)
Instrument Depth149 mm (5.9 in)
Net Weight3.2 kg (7.0 lbs) without battery
Weight with Battery4.5 kg (9.8 lbs)

Application Modules and Upgrades

ParameterValue
Limit Testing Module CompatibilityTDS3LIM
Telecommunications Mask Testing Module CompatibilityTDS3TMT
Extended Video Analysis Module CompatibilityTDS3VID
Advanced Analysis Module CompatibilityTDS3AAM
Digital Video Module CompatibilityTDS3SDI (601 Serial Digital Video)
Probe Interface TypeTekProbe Interface

Power Specifications

ParameterValue
Line Voltage Range100 V to 240 V AC (±10%)
Line Frequency Range47 Hz to 440 Hz
Power Consumption75 W maximum

Standard Accessories

ParameterValue
Included ProbesFour P6139A 10X Passive Probes

Signal Output

ParameterValue
Probe Compensator Output Amplitude5.0 V into ≥1 MΩ load
Probe Compensator Output Frequency1 kHz

Environmental

ParameterValue
Operating Vibration0.31 g RMS, 5 Hz to 500 Hz
Non-operating Vibration2.46 g RMS, 5 Hz to 500 Hz
Operating Shock50 g, 11 ms, half-sine

Storage

ParameterValue
Floppy Disk Capacity1.44 MB (3.5-inch MS-DOS compatible)

Technology

Digital Phosphor Oscilloscope (DPO)

Applications

Electronic Design and Debug, Manufacturing Test, Video Design and Service, Power Supply Design, Education and Training

Looking for the Tektronix TDS3064B?

Tell us what you need. We're building a network of equipment dealers and will get back to you if we can help source it — no obligation.

Selling this kind of equipment? Sell with us