The Tektronix TDS340A is a 100 MHz, 2-channel digital real-time oscilloscope with a maximum sample rate of 500 MS/s. It features a built-in 3.5-inch floppy disk drive, FFT analysis, and 10 ns peak detect for capturing high-speed glitches.

Specifications

General

ParameterValue
InterfacesGPIB, RS-232-C, Parallel Printer, VGA Monitor (with Option 14)
Display7-inch monochrome CRT

Physical

ParameterValue
Power Supply90 to 250 VAC RMS, 45 to 440 Hz, 65 W max
Dimensions (W×H×D)362 x 165 x 471
Weight7.0

Vertical System

ParameterValue
Channels2
Bandwidth100 MHz
Vertical Sensitivity Range2 mV/div to 10 V/div
DC Gain Accuracy±2%
Vertical Resolution8 bits
Input Impedance1 MΩ ± 1% || 20 pF ± 2 pF
Maximum Input Voltage400 V (DC + peak AC) at 1 MΩ
Input CouplingAC, DC, GND
Bandwidth Limit20 MHz

Horizontal System

ParameterValue
Sample Rate (Real Time)500 MS/s
Record Length1 K points
Time Base Range5 ns/div to 5 s/div
Time Base Accuracy±0.01%

Acquisition System

ParameterValue
Acquisition ModesSample, Envelope, Average, Peak Detect

Measurement and Math

ParameterValue
Automatic Measurements21
Advanced Math/FFTFFT Analysis

Interfaces and Connectivity

ParameterValue
Mass Storage/MediaBuilt-In 3.5 in. Floppy Disk Drive
Remote Control InterfacesGPIB, RS-232-C Programmability (Option 14)
Printer/Plotter PortsParallel Printer Interface (Option 14)
Video/Monitor OutputVGA Monitor Output (Option 14)

Trigger System

ParameterValue
Trigger SourcesCH1, CH2, EXT, EXT/10, AC Line
Trigger TypesEdge, Video

Memory

ParameterValue
Non-Volatile Setup Memory10 front-panel setups
Reference Waveform Memory2 reference waveforms (1000 points each)

Environmental

ParameterValue
Operating AltitudeUp to 3,000 m (10,000 ft)

Triggering

ParameterValue
Trigger CouplingAC, DC, HF Reject, LF Reject, Noise Reject

Measurements

ParameterValue
CursorsVoltage (ΔV), Time (ΔT), Frequency (1/ΔT)

Power

ParameterValue
Maximum Power Consumption65 W

Technology

Digital Storage Oscilloscope (DSO)

Applications

Test and Measurement