The Tektronix TDS7054 is a 4-channel, 500 MHz Digital Phosphor Oscilloscope (DPO) in the TDS7000 series, combining a 5 GS/s real-time sample rate with FastAcq technology capable of capturing over 400,000 waveforms per second. Operating on an open Windows 2000 platform with OpenChoice software, it features a 10.4-inch XGA touch-sensitive display, TekConnect probe interface, and comprehensive triggering and serial analysis capabilities.
Specifications
Vertical System
| Parameter | Value |
|---|---|
| Analog Channels | 4 |
| Bandwidth (-3 dB) | 500 MHz |
| Calculated Rise Time (10% to 90%) | 700 ps |
| Input Coupling | DC, AC, GND |
| Input Sensitivity Range | 1 mV/div to 10 V/div (1 MΩ), 1 mV/div to 1 V/div (50 Ω) |
| Bandwidth Limiters | 20 MHz, 250 MHz |
Acquisition System
| Parameter | Value |
|---|---|
| Maximum Waveform Capture Rate | > 400,000 wfms/s (FastAcq mode) |
Trigger System
| Parameter | Value |
|---|---|
| Trigger Modes | Auto, Normal, Single |
Display System
| Parameter | Value |
|---|---|
| Display Type | 10.4 in (264 mm) Color Liquid Crystal Display (TFT) |
| Touch Screen Interface | Standard touch-sensitive screen |
| Persistence Modes | Off, Variable Persistence, Infinite Persistence |
Connectivity & Input/Output Interfaces
| Parameter | Value |
|---|---|
| GPIB Interface | IEEE-488.2 standard interface |
| Ethernet Port | RJ-45 connector, 10/100Base-T |
| Serial Port | DB-9 male RS-232-C port |
| Parallel Port | Centronics IEEE 1284 DB-25 connector |
| Probe Interface | TekProbe BNC |
Power Supply
| Parameter | Value |
|---|---|
| Line Frequency Range | 47 to 63 Hz (100 to 240 V), 360 to 440 Hz (100 to 132 V) |
| Maximum Power Consumption | < 600 W |
Environmental & Safety
| Parameter | Value |
|---|---|
| Non-Operating Temperature Range | -22 °C to +60 °C |
Power & Electrical
| Parameter | Value |
|---|---|
| AC Line Voltage Range | 100 to 240 V AC RMS ±10% |
System & Storage
| Parameter | Value |
|---|---|
| Floppy Drive | 3.5 in 1.44 MB floppy drive |
Inputs & Outputs
| Parameter | Value |
|---|---|
| Auxiliary Output | BNC output (Main Trigger out or Pass/Fail) |
| PS/2 Ports | 2 (1 keyboard, 1 mouse) |
Physical & Environmental
| Parameter | Value |
|---|---|
| Operating Altitude | 3,000 m (9,843 ft) |
| Non-Operating Altitude | 12,192 m (40,000 ft) |
| Operating Humidity | 20% to 80% RH, non-condensing |
Waveform Analysis
| Parameter | Value |
|---|---|
| Automated Measurements | 53 |
Compliance
| Parameter | Value |
|---|---|
| Safety Certifications | UL 3111-1, CSA 1010.1, EN 61010-1, IEC 61010-1 |
| EMC Compliance | EN 61326 Class A, Council Directive 89/336/EEC |
Technology
Digital Phosphor Oscilloscope (DPO)
Applications
Signal Integrity Analysis, Embedded Systems Design, High-Speed Serial Bus Debug, Telecom Compliance Testing