The Tektronix TDS754D is a 4-channel, 500 MHz digital oscilloscope equipped with proprietary InstaVu acquisition technology, enabling a waveform capture rate of up to 400,000 waveforms per second to rapidly isolate elusive glitches and rare transients. Offering a maximum real-time sample rate of 2 GS/s, it provides detailed signal visibility across complex electronic systems. The instrument is equipped with a high-contrast NuColor CRT display, comprehensive trigger and math capabilities, and legacy communication interfaces (GPIB, RS-232, Centronics) suited for established automated test systems and intensive electronics debugging applications.

Specifications

General

ParameterValue
DisplayColor NuColor LCS CRT

Physical

ParameterValue
Power Supply90 to 250 VAC, 45 to 440 Hz, 300 W maximum
Operating Temperature+4 to +50
Dimensions (W×H×D)362 × 191 × 432
Weight14.1

Vertical System

ParameterValue
Number of Channels4
Analog Bandwidth (-3 dB)DC to 500 MHz
Input Sensitivity Range1 mV/div to 10 V/div (1 MΩ); 1 mV/div to 1 V/div (50 Ω)
Input Impedance1 MΩ ±0.5% or 50 Ω ±1%
Input CouplingAC, DC, GND
Calculated Rise Time700 ps
Hardware Bandwidth Limits20 MHz, 250 MHz
Maximum Input Voltage400 V (DC + peak AC) at 1 MΩ; 5 V RMS at 50 Ω

Horizontal System

ParameterValue
Maximum Real-Time Sample Rate2 GS/s (on 1 or 2 channels), 1 GS/s (on 3 or 4 channels)
Time Base Range500 ps/div to 10 s/div
Maximum Record LengthUp to 8M points (option dependent)
Time Base Delay Time Range16 ns to 250 s

Acquisition System

ParameterValue
Maximum Waveform Capture Rate> 400,000 wfms/s (InstaVu mode)
Acquisition ModesSample, Envelope, Average, Peak Detect, Hi Res

Trigger System

ParameterValue
Trigger CouplingDC, AC, HF Rej, LF Rej, Noise Rej
Trigger Holdoff Range250 ns to 12 s

Interfaces and Connectivity

ParameterValue
Input ConnectorsBNC (female)
Probe InterfaceTekProbe Level II

Storage and Mass Media

ParameterValue
Removable Media Drive3.5-inch 1.44 MB floppy disk drive

Performance

ParameterValue
Time Base Accuracy±25 ppm over any ≥1 ms interval
Position Range±5 divisions
Offset Range (1 mV to 100 mV/div)±1 V
Offset Range (101 mV to 1 V/div)±10 V
Offset Range (1.01 V to 10 V/div)±100 V
Channel-to-Channel Isolation≥100:1 at 100 MHz

Features

ParameterValue
Automated Measurements25 parametric measurements

Environmental

ParameterValue
Non-Operating Temperature-22 °C to +60 °C
Operating AltitudeUp to 3,000 m (9,843 ft)
Non-Operating AltitudeUp to 15,000 m (49,212 ft)
Operating Humidity20% to 80% RH at or below +32°C; 5% to 45% RH from +32°C to +50°C

Compliance

ParameterValue
Safety ComplianceUL 3111-1, CSA 1010.1, EN 61010-1, IEC 61010-1
Electromagnetic CompatibilityMeets EN50081-1, EN50082-1, FCC Part 15 Class A

Power Requirements

ParameterValue
Source Voltage90 to 250 VRMS
Source Frequency45 to 440 Hz
Power Consumption≤ 300 W

Technology

Digital

Applications

Oscilloscopes