The Rohde & Schwarz SMA100B RF and microwave signal generator is designed for maximum performance without compromise. It delivers purest output signals while maintaining exceptionally high output power levels, making it ideal for demanding test and measurement tasks in the semiconductor, wireless communications, and aerospace and defense industries.
Specifications
Frequency
| Parameter | Value |
|---|---|
| Minimum Frequency | 8 kHz |
| Maximum Frequency | 67 GHz (frequency-option dependent) |
| Frequency Resolution | 0.001 Hz |
Output
| Parameter | Value |
|---|---|
| Maximum Output Power | up to +38 dBm (configuration dependent) |
Modulation
| Parameter | Value |
|---|---|
| Modulation | AM, FM, Phase, Pulse |
| Sweep Modes | Frequency, Level, LF (linear, logarithmic) |
General
| Parameter | Value |
|---|---|
| Reference Oscillator | Internal OCXO (high-stability options available) |
| Interfaces | USB, LAN, GPIB |
| Display | 5" touchscreen (2 HU) or 7" touchscreen (3 HU) |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 100 V to 240 V AC, 50 Hz to 60 Hz / 400 Hz |
RF Characteristics
| Parameter | Value |
|---|---|
| SSB Phase Noise (Option) | <-132 dBc/Hz (typ.) at 10 GHz with 10 kHz offset |
| Wideband Noise | <-162 dBc/Hz (meas.) at 10 GHz with 30 MHz offset |
| Level Resolution | 0.01 dB |
| Output Impedance | 50 Ω |
Modulation Capabilities
| Parameter | Value |
|---|---|
| AM Depth Range | 0% to 100% |
| AM Resolution | 0.1% |
| Pulse Modulation On/Off Ratio | > 80 dB |
Front and Rear Panel Interfaces
| Parameter | Value |
|---|---|
| RF Output Connector Type | N female (up to 6 GHz) or Test Port Adapter (3.5 mm / 2.92 mm / 1.85 mm option dependent) |
| LAN Interface Port | 10/100/1000 Base-T (Gigabit Ethernet) |
System, Software and Emulation
| Parameter | Value |
|---|---|
| Display Resolution | 800 x 480 pixels |
Power, Physical and Environmental
| Parameter | Value |
|---|---|
| Calibration Interval | 3 years (recommended) |
Ordering Options and Configurations
| Parameter | Value |
|---|---|
| Pulse Generator Software Option | R&S®SMAB-K23 |
| Pulse Train Software Option | R&S®SMAB-K27 |
| Removable Mass Storage Option | R&S®SMAB-B85 (Removable Solid State Drive) |
Inputs & Outputs
| Parameter | Value |
|---|---|
| Reference Input Connector | BNC female |
| Reference Output Connector | BNC female |
System Features
| Parameter | Value |
|---|---|
| USB Power Sensor Support | Direct connection of R&S NRP power sensors |
Compliance
| Parameter | Value |
|---|---|
| EMC Standards | EN 61326-1, EN 55011 Class A |
| Safety Standards | IEC/EN 61010-1 |
Interfaces
| Parameter | Value |
|---|---|
| GPIB Interface Standard | IEEE-488.2 |
Power
| Parameter | Value |
|---|---|
| AC Input Voltage Range | 100 V to 240 V AC (±10%) |
| AC Input Frequency | 50 Hz to 60 Hz / 400 Hz (±10%) |
Technology
RF and Microwave Signal Generation
Applications
Test and measurement for RF semiconductor, wireless communications, and aerospace & defense industries