The Rohde & Schwarz SMP22 is a high-performance microwave signal generator designed for precise signal generation across a wide frequency range of 10 MHz to 20 GHz. Known for its outstanding spectral purity, high output power, and fast frequency switching speed, it serves as a reliable instrument for radar and communications equipment testing, EMC measurements, and general R&D laboratory applications.

Specifications

Frequency

ParameterValue
Minimum Frequency10 MHz
Maximum Frequency20 GHz
Frequency Resolution0.1 Hz

Output

ParameterValue
Phase Noise<-105 dBc (1 Hz) at 10 kHz offset from 10 GHz carrier

General

ParameterValue
Reference Oscillator10 MHz internal reference
InterfacesGPIB (IEEE 488.2)
DisplayBacklit LCD
Reference Output Frequency10 MHz
Warm-up Time10 min

Physical

ParameterValue
Power Supply100 V to 240 V AC, 47 Hz to 440 Hz
Dimensions (W×H×D)435 mm x 147 mm x 570 mm
Weight24 kg

Amplitude Specifications

ParameterValue
Level Accuracy<±0.9 dB at 0 dBm (10 MHz to 20 GHz)

Sweep and Operating Modes

ParameterValue
Setup Storage50 complete instrument setups

Hardware and Software Options

ParameterValue
Optional Phase ModulatorAvailable via option SMP-B5
Optional Pulse ModulatorAvailable via options SMP-B2/B3
Optional Pulse GeneratorAvailable via option SMP-B4

System Connectivity and Interfaces

ParameterValue
RF Output ConnectorPC 3.5 mm (female)
RF Output Impedance50 ohms

Physical and Environmental Specifications

ParameterValue
Operating Temperature Range0 °C to +55 °C
Storage Temperature Range-40 °C to +70 °C

Power Requirements

ParameterValue
Power Consumptionapprox. 150 W

Spectral Purity

ParameterValue
Non-Harmonic Spurious<-60 dBc (at > 10 kHz offset from carrier)

Level

ParameterValue
Level Resolution0.1 dB
Output SWR< 1.5 (for f < 2 GHz), < 2.0 (for f >= 2 GHz)

Pulse Generator (Option SMP-B12)

ParameterValue
Pulse Generator Pulse Width Range20 ns to 85 s

Frequency Modulation (FM)

ParameterValue
Maximum FM Deviation5 MHz (at 12.4 GHz to 20 GHz carrier)
FM BandwidthDC to 2 MHz (DC-coupled), 10 Hz to 2 MHz (AC-coupled)

Amplitude Modulation (AM)

ParameterValue
AM Depth Range0% to 99%

Phase Modulation (Option SMP-B15)

ParameterValue
Maximum Phase Deviation10 rad (normal mode), 100 rad (high-deviation mode)
Phase Modulation BandwidthDC to 100 kHz

Sweep Modes

ParameterValue
Ramp Sweep Time Range10 ms to 100 s

System & Interfaces

ParameterValue
Command SetSCPI

High Output Power (Option SMP-B11)

ParameterValue
Max Output Power with Option SMP-B11> +20 dBm (up to 18 GHz), > +18 dBm (18 GHz to 20 GHz)

Power Supply

ParameterValue
AC Supply Voltage Range100 V to 240 V AC (nominal, 90 V to 265 V operating)
AC Supply Frequency Range47 Hz to 440 Hz

Technology

RF and Microwave Signal Generator

Applications

Radar Testing, Communications Equipment, EMC, R&D Calibration

Looking for the Rohde & Schwarz SMP22?

Tell us what you need. We're building a network of equipment dealers and will get back to you if we can help source it — no obligation.

Selling this kind of equipment? Sell with us