The Tektronix TLA5201B is a 34-channel portable logic analyzer belonging to the TLA5000B Series. It is designed to offer high-speed timing resolution, fast state acquisition, deep memory, and advanced triggering capabilities, making it ideal for digital design debugging, timing verification, and state analysis.
Specifications
General
| Parameter | Value |
|---|---|
| Interfaces | LAN (10/100/1000 Base-T RJ-45), 4x USB 2.0 (2 front, 2 rear), SVGA, Parallel, Serial, PS/2 |
| Display | 10.4-inch Active-matrix color TFT LCD, 1024 × 768 (XGA) |
| Warm-up Time | 30 minutes |
Physical
| Parameter | Value |
|---|---|
| Power Supply | 90 to 250 VAC, 45 to 66 Hz, 350 W maximum |
| Operating Temperature | +5 °C to +45 °C |
| Dimensions (W×H×D) | 437 mm × 285 mm × 378 mm |
| Weight | 12.0 |
| Cooling Clearance | 51 mm (2 in) on left, right, and rear |
Acquisition
| Parameter | Value |
|---|---|
| Number of Channels | 34 (32 data, 2 clock) |
| Maximum State Clock Rate | 235 MHz |
| Maximum Timing Sample Rate (Half Channel) | 2 GHz (500 ps) |
| Maximum Timing Sample Rate (Full Channel) | 1 GHz (1 ns) |
| MagniVu Timing Resolution | 125 ps (8 GHz) on all channels |
| MagniVu Record Length | 16 Kb per channel |
| Record Length (Per Channel) | 2 Mb / 8 Mb / 32 Mb (option dependent) |
| Minimum Pulse Width | 1.25 ns (typical), 125 ps (MagniVu) |
| Channel Configuration | 34 channels (32 data, 2 clock/qualifier) |
Triggering
| Parameter | Value |
|---|---|
| Trigger State Sequences | 16 states |
| Word Recognizers | 16 (each 140 bits wide) |
| Transition Recognizers | 4 |
| Range Recognizers | 4 |
| Counter/Timers | 2 (32-bit) |
| Glitch/Violation Triggering | Setup/Hold violation |
| Trigger Position | Any point in record (0% to 100%) |
| External Trigger Input Impedance | 1.5 kΩ nominal |
| External Trigger Output Impedance | 50 Ω nominal |
| External Trigger Output Level | High: ≥2.0 V into 50 Ω; Low: ≤0.4 V into 50 Ω |
Probing & Input
| Parameter | Value |
|---|---|
| Supported Probes | P6417, P6418, P6419, P6434 |
| Input Resistance | 20 kΩ |
| Input Capacitance | 1.4 pF (with P6417/P6418) |
| Threshold Range | -2.5 V to +5.0 V |
| Threshold Accuracy | ±(100 mV + 3% of threshold setting) |
| Maximum Input Voltage | ±15 V |
| Minimum Input Voltage Swing | 300 mV (single-ended) |
System & Processing
| Parameter | Value |
|---|---|
| Operating System | Microsoft Windows XP Professional |
| Storage Capacity | ≥80 GB HDD |
| Removable Media | DVD±RW |
Software & Analysis
| Parameter | Value |
|---|---|
| Analog-Digital Time Correlation | iView™ technology |
External Connections
| Parameter | Value |
|---|---|
| External Trigger Input | BNC connector, TTL compatible |
| External Trigger Output | BNC connector, TTL compatible |
Environmental & Compliance
| Parameter | Value |
|---|---|
| Storage Temperature | -20 °C to +60 °C |
| Relative Humidity | 20% to 80% (non-condensing) |
| Operating Altitude | Up to 3,000 m (10,000 ft) |
| Safety Certifications | UL61010-1, CAN/CSA-C22.2 No. 61010-1, EN61010-1 |
Performance Options
| Parameter | Value |
|---|---|
| State Clock Speed (Standard) | 100 MHz |
| State Clock Speed (Option 1S) | 235 MHz |
| Record Length (Standard) | 64 Kb per channel |
| Record Length (Option 1M) | 256 Kb per channel |
| Record Length (Option 2M) | 1 Mb per channel |
| Record Length (Option 3M) | 4 Mb per channel |
| Record Length (Option 4M) | 8 Mb per channel |
Input Properties
| Parameter | Value |
|---|---|
| Number of Clocks | 2 |
| Number of Qualifiers | 2 |
I/O Ports
| Parameter | Value |
|---|---|
| USB Ports | 6 x USB 2.0 (2 front, 4 rear) |
| LAN Port | 1 x RJ-45 (10/100/1000 Base-T) |
| External Display Output | 15-pin D-sub (SVGA) |
| Serial Port | 9-pin D-sub (RS-232) |
| Parallel Port | 25-pin D-sub |
| PS/2 Ports | 2 (Keyboard, Mouse) |
Power Requirements
| Parameter | Value |
|---|---|
| Line Voltage Range | 90 to 264 VAC |
| Line Frequency Range | 45 to 66 Hz |
| Power Consumption | 300 W maximum |
Environmental
| Parameter | Value |
|---|---|
| Operating Shock | 15 g, half-sine, 11 ms duration |
| Non-operating Shock | 30 g, half-sine, 11 ms duration |
| Operating Vibration | 0.31 g RMS, 5 Hz to 500 Hz |
| Non-operating Vibration | 2.46 g RMS, 5 Hz to 500 Hz |
Signal Outputs
| Parameter | Value |
|---|---|
| Probe Calibration Output Level | High: 1.0 V ±10% into 50 Ω; Low: <0.1 V into 50 Ω |
| Probe Calibration Output Frequency | 1 MHz ±10% |
| Probe Calibration Output Impedance | 50 Ω nominal |
Technology
Logic Analyzer
Applications
Digital system debugging, hardware verification, state and timing analysis