The Tektronix TLA7AA1 is a 34-channel logic analyzer module for the TLA700 and TLA7000 series mainframes. Featuring 32 data channels and 2 clock/qualifier channels, the module utilizes Tektronix's MagniVu™ technology to deliver up to 8 GHz (125 ps) high-resolution timing analysis alongside simultaneous state analysis up to 800 MHz. Designed for debugging complex digital systems, it supports advanced triggering, transitional storage, and low-loading compression probing.

Specifications

General

ParameterValue
InterfacesMainframe backplane, Tektronix compression probe interface
Warm-up Time30 minutes
Recommended Calibration Interval1 year

Physical

ParameterValue
Power SupplyPowered by mainframe slot; Power dissipation: 75 W (typical), 100 W (maximum)
Operating Temperature0 °C to +50 °C
Dimensions (W×H×D)59 mm × 262 mm × 373 mm
Weight2.1

Channel and Acquisition Performance

ParameterValue
Number of Channels34 (32 data, 2 clock/qualifier)
Data Channels32
Clock/Qualifying Channels2
Maximum State Acquisition SpeedUp to 800 MHz (option dependent: 120 / 200 / 450 / 800 MHz)
Maximum Conventional Timing Speed (Half Channel)2.0 GHz (500 ps)
Maximum Conventional Timing Speed (Full Channel)1.0 GHz (1 ns)
Maximum MagniVu Timing Speed8.0 GHz (125 ps)
MagniVu Timing Resolution125 ps
MagniVu Memory Depth16 kb per channel
Acquisition Memory Depth (Half Channel)Up to 64 Mb (option dependent: 128 kb, 512 kb, 2 Mb, 8 Mb, 16 Mb, 32 Mb, 64 Mb)
Acquisition Memory Depth (Full Channel)Up to 32 Mb (option dependent: 64 kb, 256 kb, 1 Mb, 4 Mb, 8 Mb, 16 Mb, 32 Mb)
Setup and Hold Window1.0 ns
Minimum Pulse Width (Conventional)1.25 ns
Minimum Pulse Width (MagniVu)250 ps
Transitional StorageSupported

Triggering and Sequencing

ParameterValue
Number of Trigger States16
Word Recognizers16 (34 bits wide)
Range Recognizers4 (34 bits wide)
Transition Detectors4 (34 bits wide)
Counter/Timers2 (16-bit counters or 51-bit timers)
Trigger PositionPre-trigger, post-trigger, or delay
Glitch/Violation TriggeringYes (1.25 ns minimum pulse width)
Setup and Hold Violation TriggeringYes
Multi-Module Trigger LinkageSupported via mainframe trigger bus

Analog Properties & Probe Interface

ParameterValue
Input Impedance (Resistance)20 kΩ (with P68xx/P69xx probes)
Threshold Voltage Range-2.0 V to +4.5 V
Threshold Setting Resolution10 mV
Threshold Voltage Accuracy±(35 mV + 1% of setting)
Maximum Input Voltage (Absolute)±15 V
Supported Probe FamiliesP6800 series, P6900 series
Probe Connection TypeLow-loading compression probing system
Analog Output / MuxSupported (routes any digital channel to analog output SMB)

Clocking and Timing Modes

ParameterValue
Clocking ModesState, Conventional Timing, MagniVu Timing, Transitional
Clock Qualifiers4
Clock Demultiplexing Modes1:2, 2:1, Demux-H, Demux-L

Mainframe Compatibility & Host Interface

ParameterValue
Compatible MainframesTLA7000 Series (TLA7012, TLA7016), TLA700 Series (TLA714, TLA715, TLA721)
Module Slot Width2 slots
Required Controller SoftwareTLA Application Software V4.1 or higher
Oscilloscope IntegrationiView™ (external Tektronix oscilloscope integration supported)

Environmental & Safety Compliance

ParameterValue
Storage Temperature Range-20 °C to +60 °C
Relative Humidity (Operating)20% to 80% RH (non-condensing)
Relative Humidity (Non-operating)5% to 90% RH (non-condensing)
Maximum Operating Altitude3,000 m (10,000 ft)
Maximum Non-operating Altitude12,190 m (40,000 ft)

Electrical

ParameterValue
Minimum Input Voltage Swing300 mV p-p (single-ended), 150 mV p-p (differential)

Analog Mux

ParameterValue
Analog Multiplexer Bandwidth3 GHz (with P69xx probes), 2 GHz (with P68xx probes)

Environmental

ParameterValue
Operating Shock30 g (11 ms, half-sine)
Non-operating Shock50 g (11 ms, half-sine)
Operating Vibration0.31 g RMS (5 Hz to 500 Hz)
Non-operating Vibration2.46 g RMS (5 Hz to 500 Hz)

Analog Output / Mux

ParameterValue
Analog Output ConnectorSMB

Technology

Logic Analyzer Module

Applications

Digital system debugging, hardware verification, FPGA debug, and high-speed timing analysis